639649
141
Zoom out
Zoom in
Previous page
1/178
Next page
Troubleshooting
5-11
1
1
1
1
5
Troubleshooting
7
Prepare air purge.
Remove the ports in pairs that correspond to the dumper
selected in step 4.
8
Press the key to purge air.
(1) Open the port and attach the jig when the ink starts dripping
from the head upon pressing .
(The display shows the standby screen after the air purge is
completed.)
(2) Pushed out ink flows to the jig.
(3) Keep the ink flowing for about one minute after it starts to flow.
(4) After allowing ink to flow for about one minute, close the port.
(5) Change the jig to the port that air is not yet purged, and repeat
the procedure to allow ink to flow from the port for about one minute.
(6) After allowing ink to flow for about one minute, close the port.
9
Terminate air purge by pressing the key.
Close the port.
Ink may leak when removing the jig.
Put a paper towel, a piece of cloth, or other
material to absorb the leaked ink around
the port.
When purging the air, make sure that the
attached jig will not come off the waste ink
drainage.
When attaching an additional jig, make
sure that the tube opening is kept within
the opening of the waste fluid bottle
connector.
For “6-color” or “6-color + White” ink, do not open the yellow port while the black port is
open.
When removing the jig, ink may leak. Put a
paper towel etc. around the port.
Jig
Port
AIR PG
START [ ENT ]
Photo of the actual installation
of the extension tube
AIR PG
COMP L ETED [ ENT ]
Ink
Required time:
about one minute
Port 1 Port 4 Port 5 Port 8
Port 7Port 6Port 3Port 2
Port 1 Port 4 Port 5 Port 8
Port 7Port 6Port 3Port 2
6-color Ink Set 6-color + White Ink Set
Head 1 (Left) Head 2 (Right) Head 1 (Left) Head 2 (Right)
CAPP I NG POS I T I ON
MOVE START [ ENT ]
141


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4160 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4160

Ricoh Pro L4160 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info