639649
61
Zoom out
Zoom in
Previous page
1/178
Next page
2-23
1
2
Basic Operations
4
5
6
Set the media feeding
Correct the feeding rate of media.
If the correction value is not appropriate, stripes may appear on the printed image, thus resulting in a poor
printing.
Setting Feed Correction
A pattern for media correction is printed and a media-feeding rate is corrected.
1
Set a media. ( P.2-5)
2
Press the key in LOCAL.
3
Press the key.
4
Press the key to print a correction pattern.
5
Check the correction pattern and enter a correction
value.
Enter a correction value in "+": The boundary between the two bands is widened.
Enter a correction value in "-": The boundary between the two bands is narrowed.
When you have changed the media type, check the pattern and perform adjustment depending on the
status.
When you have changed the temperature of the heaters, make sure that the [CONSTANT] lamp lights
up and that the preset temperature is reached, and then start the correction.
When using a roll medium, rewind the medium by hand before printing so that it is not loose. When
the roll medium has not been rewound tightly, it may cause image quality to deteriorate.
When printing with a take-up device, set the media first and then perform media correction.
Two bands are printed in the correction pattern.
Make adjustment so that an even color density is obtained in the boundary between the two bands.
If the correction pattern that has been printed on a media such as transparent film is difficult to
discern, feed the media forward so that the printed area is out of the drying heater, place a sheet of
paper on the back of the media, and then rewind the media.
When making adjustment to the media-feeding rate, use of a magnifying glass is recommended.
Second band
First band
Media advance direction
FEED COMP .
<ENT>
FEED COMP .
PR I NT [ ENT ]
** PRINTING **
PLEASE WA I T
FEED COMP .
=0
When entering the value in “+”
0
When entering the value in “-”
In case that patterns overlapsInput example: In case that patterns are separate
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4160 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4160

Ricoh Pro L4160 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info