639649
55
Zoom out
Zoom in
Previous page
1/178
Next page
2-17
1
2
Basic Operations
4
5
6
Preparing for the Heaters
Changing the Temperature Settings for the Heaters
Set the heater temperature.
Depending on the media and the profile to use, set the heater temperature.
It may take several minutes to tens of minutes for the set temperature to be reached, depending on the ambient
temperature.
1
Press the key.
2
Press the key.
3
Press to set the temperature of
each heater.
Heater selecting : Select with
Temperature setting : Set with
The heater starts to get hot.(The [HEAT] lamp lights in orange.)
When the heater temperature reaches the set temperature, the [HEAT] lamp goes off and the
[CONSTANT] lamp lights in green.
4
Press the key to end the setting.
The screen moves to the temperature setting of FAN HEATER.
You can change the temperature set here also in [HEATER] of the [SETUP] menu. ( P.3-2)
The Heater temperature is controllable at the RIP side if the RIP in use has a function controllable.
(For the setting procedures, refer to the instruction manual of the RIP in use.)
Depending on the power supply voltage, amount of heat generation differs. For the power supply
voltage of 100V to 120V, it may not reach 70 °C.
If you set [VACUUM] of the [SETUP] menu more than needs, it may cause temperature decrease of
the print heater.
Use this machine under 20 to 30°C. The temperature may not reach the set value due to the
environmental temperature condition.
When you lower the heater temperature, ensure drying time with the procedures below:
Set [SET UP] – [DRYING TIME].
Increase the number of printing passes.
Print unidirectionally.
PRE PRT POST
23° C23° C23° C
Heater temperature
confirming display
OFF OFF OFF
(23° C23° C23° C)
The set temperature: 20 to 70°C
OFF OFF OFF
(23° C23° C23° C)
Current heater temperature
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4160 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4160

Ricoh Pro L4160 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info