639649
36
Zoom out
Zoom in
Previous page
1/178
Next page
1-18
Media
Usable media sizes and notes for handling are described.
Usable sizes of media
Caution in handling of medias
Pay attention to the followings for handling of medias.
Model Pro L4130 Pro L4160
Type of Recommended media
Thin coat paper/PET/Tarpaulin/Weatherproof PVC/Polyester cloth/
Cotton
Maximum width
1371mm 1620mm
Minimum width
210mm
Maximum printing width
1361mm 1610mm
Roll media
Thickness 0.3mm or less
*1
*1. Some media have bad drying characteristics. Please check this beforehand.
Roll outside diameter
φ180mm and less
Roll weight
25kg and less (for small-size media holder, 25kg and less)
Roll inside diameter 3 or 2 inches
Side printed Side facing outward
Roll end treatment
The roll end is gently fixed to the core with weak-adhesive tape or weak
glue for easy removal.
When handling media, wear the gloves.
If you touch the media with your bare hand, the media may be stained due to fingerprints or oil of your
finger. Be careful about it.
Do not leave the media with the heater ON for a long time.
Waviness may occur on the media and it may cause media clogging.
When the pinch roller is at the lower position, even if it is for a short time, impression produced by the
pinch roller is left depending on the media material. Perform test feeding
(P.2-19) to check the
media status.
Use media recommended by RICOH to ensure reliable, high-quality printing.
Set the heater temperature to meet the characteristics of the media.
Set the temperature of the Pre-heater, Print heater and Post-heater according to the type and
characteristics of the media used.
Automatic temperature setting can be made on the operation panel by setting the profile on the
dedicated RIP. For setting on the RIP, refer to the instruction manual for your RIP.
Pay attention to the expansion and contraction of the media.
Do not use media immediately after unpacking. The media can be affected by the room temperature
and humidity, and thus it may expand and contract.
The media have to be left in the atmosphere in which they are to be used for 30 minutes or more after
unpacked.
Do not use curled media.
This may result in paper jamming.
If a regular-sized coated sheet of media is rolled and stored, the coated side has to face outside.
Be careful to dusts on the edge face of the medium.
Some rolls have dusts contained in the package gathered on the edge surface of the roll. If you use as
it is, the drawing quality may be degraded due to nozzle missing or ink drops. Be sure to set the roll
after removing dusts adhering on the edge face of the roll.
Use a media wider than 450 mm when performing the ink drop position correction for bidirectional
printing. Correcting the ink drop position for bidirectional printing cannot be performed on narrower
media. Use unidirectional printing in such a case. Also, select [STRONG] in the [VACUUM] setting if the
media is not securely adhered to the media transfer surface when using a media such as narrow media.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4160 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4160

Ricoh Pro L4160 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info