639648

Ricoh Pro L4130 Manual

150
Zoom out
Zoom in
Previous page
1/178
Next page
5-20
Message Cause Solution
The media is not set.
The sensor has been broken.
Set the media. ( P.2-5) If the same
error message appears again, contact
your local distributor to call for service.
The data has been received.
Press the key to perform print-
ing.
Or, perform data clear.
The ink of the ink cartridge has
been nearly used up.
Press the key to check the rel-
evant Eco-cartridge. Be careful because
it may be INK NEAR END soon.
Ink could not be supplied to the
damper.
Perform “DAMPER ( P.5-9) ” of the
maintenance. Also check the remaining
amount of ink in the Eco-cartridge.
Even if you performed this, when the
message is displayed, contact your local
distributor to call for service.
The liquid level sensor abnormality
of the damper has been detected.
Turn off the power to the machine and
turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
Overflow from the damper has been
detected.
Perform “DAMPER ( P.5-9) ” of the
maintenance. Also check the remaining
amount of ink in the cartridge.
Even if you performed this, when the
message is displayed, contact your local
distributor to call for service.
Though a certain amount was con-
sumed, there is no change in the
damper sensor High.
Though a certain amount was con-
sumed, there is no change in the
damper sensor Low.
To prevent settling out in the white
ink pack, this is displayed periodi-
cally.
Following the procedures, shake the
white ink cartridge. ( P.1-14)
The machine temperature is high.
Adjust the ambient temperature of the
installation place.
The machine temperature is low.
After “error 710 HEATER TEMP
ERROR” has occurred, the power is
forcibly turned off, and when you
restart it, this is displayed.
If the ERROR 710 appears again, con-
tact your local distributor to call for ser-
vice.
The specified expiration date of an
ink cartridge has passed.
The expiration date has passed.
However, you can use it until the end of
the following month.
Press the key to check the car-
tridge generating the warning.
The expiration date of an ink car-
tridge has passed (one month has
passed after the specified expiration
date).
One month has passed after the expira-
tion date. However, you can use it until
the end of this month. (The red LED
blinks.)
Press the key to check the car-
tridge generating the warning.
<LOCAL>
** NO MEDIA **
<LOCAL>
DATA REMA I N
<LOCAL>
INK NEAR END [ENT]
<LOCAL>
SUPPLY I NK :MMCCYYKK
<LOCAL>
DAMPER Se n s : MMCCYYKK
<LOCAL>
I n kOv e r f l ow : MMCCYYKK
<LOCAL>
DAMPER / H I GH :MMCCYYKK
<LOCAL>
DAMPER / LOW : MMCCYYKK
SHAKE WH I TE I NK
CARTR I DGES [ ENT ]
<LOCAL>
MachineTEMP/Hi ***
°
C
<LOCAL>
MachineTEMP/Lo ***
°
C
HEATER TEMP ERROR
POWER OFF [ ENT ]
<LOCAL>
Exp i r a t i on [ ENT ]
<LOCAL>
Expi rat ion(1M) [ENT]
… 150 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4130 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4130

Ricoh Pro L4130 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info