639648
124
Zoom out
Zoom in
Previous page
1/178
Next page
4-28
Replacing consumables
Replacing the wiper
The wiper is consumable.When the display indicates that it is necessary to
check and replace the wiper, immediately replace the wiper with a new one.
Also, wipe ink sticking to the lower surface of the slider off.
1
Press the key in LOCAL.
2
Press the key.
The carriage moves to the maintenance position.
If the carriage is not covered by the ink cap for a long period of
time, the nozzle face of the head may get dry and clogged,
resulting in white lines being left in the printed image.
The buzzer sounds periodically while the carriage is out of the
capping station. The buzzer sounds at shorter interval when the
print heater temperature is high.
3
Open the right maintenance cover then remove the
wiper.
Pull out the wiper by holding the protrusions at its both ends.
4
Insert a new wiper.
Insert a new wiper by holding its both ends.
5
Close the right maintenance cover then press the
key.
After its initial operation, the machine returns to LOCAL.
When the warning message for replacing wiper is shown, confirm whether there is no damage and
fuzz at the top edge of the wiper film. If there is no damage on the top edge of the wiper film, it is
possible to use the wiper continuously without replacing it.
A wiper is a consumable. Buy one through the dealer in your region or at our service office.
When you replace it before the message is displayed, first perform carriage out and then replace it.
( P.4-5Steps 1 to 2)
After replacing, reset the counter for the number of times the wiper was used. ( P.3-25)
Until the replacement work is completed, [COMPLETED: ent] is displayed on the screen.
After the work up to the Step 4 is completed and you close the right maintenance cover,
press the key.
<LOCAL>
REPLACE WI PER
[MNT]
REPLACE WI PER
EXECUTE [ ENT ]
MAINT.
REPLACE WI PER
COMP L ETED [ ENT ]
Projection
Projection
Close a cover
PLEASE WA I T
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4130 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4130

Ricoh Pro L4130 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info