639648
109
Zoom out
Zoom in
Previous page
1/178
Next page
4-13
1
1
1
4
Routine Maintenance
Cleaning the Head and the Area around It (every day)
Because the head employs a very precise mechanism, due care needs to be taken when it is cleaned.
Using a clean stick, etc., rub off gelatinous ink or dust that may stick to the lower part of the slider and the area
around the head.In doing so, never rub the nozzles of the head.
1
Press the key in LOCAL.
2
Press the key.
3
Press to select [HEAD MAINT.].
4
Press the key.
Carriage will move to the left end of this device.
If the carriage is not covered by the ink cap for a long period
of time, the nozzle face of the head may get dry and clogged,
resulting in white lines being left in the printed image.
• The buzzer sounds periodically while the carriage is out of the
capping station. The buzzer sounds at shorter interval when
the print heater temperature is high.
5
Open the left maintenance cover.
(1) Turn four screws that fix the maintenance cover to
the left, and remove them.
(2) Remove the maintenance cover.
If the maintenance cover is hard to remove, use the
supplied screwdriver.
Tools required for cleaning
Clean stick Gloves • Goggles
Be sure to wear the attached goggles and gloves when cleaning the area around the
head.Otherwise, you may get ink in your eyes.
The ink contains organic solvent.If you get the ink on your skin or in your eyes, wash it away
with plenty of water immediately.
CARR I AGE OUT
[ENT]
MAINT.
MOV E POS I T I ON
:STATION MAINT.
MOV E POS I T I ON
:HEAD MAINT.
Screw
Screw
Maintenance
cover
Rotate it left.
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4130 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4130

Ricoh Pro L4130 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info