639315
9
Zoom out
Zoom in
Previous page
1/206
Next page
vii
Important Information
About High Altitude mode
Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1700 meters or
higher.
Using the projector at altitudes approximately 5500 feet/1700 meters or higher without setting to [HIGH ALTITUDE]
can cause the projector to overheat and the protector could shut down. If this happens, wait a couple minutes and
turn on the projector.
Using the projector at altitudes less than approximately 5500 feet/1700 meters and setting to [HIGH ALTITUDE]
can cause the lamp to overcool, causing the image to icker. Switch [FAN MODE] to [AUTO].
Using the projector at altitudes approximately 5500 feet/1700 meters or higher can shorten the life of optical com-
ponents such as the lamp.
About Copyright of original projected pictures:
Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue
such as a coffee shop or hotel and employing compression or expansion of the screen image with the following func-
tions may raise concern about the infringement of copyrights which are protected by copyright law.
[ASPECT], [KEYSTONE], Magnifying feature and other similar features.
This device is not intended for use in the direct eld of view at visual display workplaces. To avoid incommoding reec-
tions at visual display workplaces this device must not be placed in the direct eld of view.
Power management function
The projector has power management functions. To reduce power consumption, the power management functions (1
and 2) are factory preset as shown below. To control the projector from an external device via a LAN or serial cable
connection, use the on-screen menu to change the settings for 1 and 2.
1. STANDBY MODE (Factory preset: POWER-SAVING)
To control the projector from an external device, select [NORMAL] for [STANDBY MODE].
NOTE:
When [POWER-SAVING] is selected for [STANDBY MODE], the following connectors and functions will not work:
PC Control port, Monitor Out connector, Audio Out connector, USB (PC) port, LAN functions, Mail Alert function, DDC/CI.
2. POWER OFF ON NO SIGNAL (Factory preset: 20 minutes)
To control the projector from an external device, select [OFF] for [POWER OFF ON NO SIGNAL].
NOTE:
When [20 MIN.] is selected for [POWER OFF ON NO SIGNAL], you can enable the projector to automatically turn off in 20 minutes
if there is no signal received by any input or if no operation is performed.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh PJ WX5361N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh PJ WX5361N in the language / languages: English as an attachment in your email.

The manual is 21,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh PJ WX5361N

Ricoh PJ WX5361N User Manual - German - 205 pages

Ricoh PJ WX5361N User Manual - Dutch - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info