639289
76
Zoom out
Zoom in
Previous page
1/188
Next page
2. Select [Perform Simple Wireless LAN Setup], and then press the [Enter] button.
3. Select either [Connect by PIN] or [Connect by Push], and then press the [Enter] button.
4. If [Connect by PIN] is selected, enter the PIN code of the projector displayed on the screen
into the access point, and then proceed to Step 6.
You must preconfigure the access point's simple wireless LAN setup function.
5. If [Connect by Push] is selected, press the access point push button.
6. When the message "Connected to the wireless LAN device." is displayed, press the [Enter]
button.
7. Select [Disable DHCP (Manual Settings)] or [Enable DHCP (Auto Settings)], and then press
the [Enter] button.
If you select [Enable DHCP (Auto Settings)], proceed to Step 11.
8. Specify the projector's IP address.
9. Specify the subnet mask.
10. Specify the default gateway.
11. If the message "To perform connection by WPA/WPA2-EAP, continuous setting on
Network Setting Menu: Wireless LAN: Security is required." appears, press the [OK]
button and continue configuring the wireless LAN settings in the Network Settings menu.
Otherwise, proceed to Step 12.
For details about how to set up the wireless LAN connection by WPA/WPA2-EAP, see page 112
"Network Settings Menu".
12. Select [Continue Wizard] or [End Wizard] on the confirmation screen, and then press the
[Enter] button.
To proceed to the wired LAN settings, select [Continue Wizard]. For details about how to configure
the wired LAN settings, see page 72 "Configuring the Wired LAN Settings".
To end the network settings, select [End Wizard].
The wireless LAN setup is complete.
To project the image from a computer, see page 77 "Projecting a Computer's Screen via a
Network".
Configuring the settings manually
Contact your network administrator for the information required for configuring network settings, such as
the SSID and the network key.
4. Using the Projector via a Network
74
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh PJ WX4241N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh PJ WX4241N in the language / languages: English as an attachment in your email.

The manual is 8,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh PJ WX4241N

Ricoh PJ WX4241N User Manual - German - 200 pages

Ricoh PJ WX4241N User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info