❽ Controlling the Projector by Using an HTTP Browser
Overview
Using the web browser on the computer, the HTTP server screen of the projector can be displayed to operate the projector.
For the HTTP server screen of the projector, there is the basic HTTP server screen and the dedicated HTTP server screen.
Possible operations on the HTTP server screen
(1) Possible operations on the basic HTTP server screen
• Configure the email notification. (ALERT MAIL)
When the projector is connected to a network (wired LAN), notifications on the lamp replacement period and various errors
are sent to the email address that has been set up.
• Operate the projector.
Operations such power on/off of the projector, input terminal switchover, volume control, picture control etc. can be carried
out.
• Configure the [PJLink PASSWORD] and [AMX BEACON] etc.
(2) Possible operations on the dedicated HTTP server screen
• When using the following functions, configure the settings required to connect the projector to the network (wired LAN/wire-
less LAN).
• Projection Utility
• Advanced Network Utility
• Network Management Utiliy
To view the HTTP server screen
(1) Basic HTTP server screen
1. Connect the projector to the computer with a LAN cable sold commercially. (→ page 166)
2. Select [SETUP] → [NETWORK SETTINGS] → [WIRED LAN] in the on-screen menu to configure the network settings. (→
page 120)
3. Start up the web browser on your computer and enter the address or URL in the input field.
Specify the address or URL as “http://<IP Address of Projector>/index.html”.
The basic HTTP server screen will be displayed.
(2) HTTP server screen
1. Connect the projector to the computer with a LAN cable sold commercially. (→ page 166) Alternatively, install a wire-
less LAN unit sold separately. (→ page 167)
2. Select [INPUT TERMINAL] → [ETHERNET] in the on-screen menu.
The application menu will be displayed.
3. Select “NETWORK SETTINGS (MM)” and configure the network settings. (→ page 136)
TIP:
• If you want to set the IP address here, set a dierent IP address in the same segment as the IP address that has been set up in the basic HTTP server screen.
4. Start up the web browser on your computer and enter the address or URL in the input field.
Specify the address or URL as “http://<IP Address of Projector >/index.html”.
TIP: The factory setting IP address is [DHCP ON].
NOTE:
• To use the projector in a network, consult with your network administrator about network settings.
• The display’s or button’s response can be slowed down or operation may not be accepted depending the settings of your network.
Should this happen, consult your network administrator. The projector may not respond if its buttons are repeatedly pressed in rapid intervals. Should this happen,
wait a moment and repeat. If you still can’t get any response, turn o and back on the projector.
• If the PROJECTOR NETWORK SETTINGS screen does not appear in the web browser, press the Ctrl+F5 keys to refresh your web browser (or clear the cache).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Ricoh PJ WU6181N at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Ricoh PJ WU6181N in the language / languages: English as an attachment in your email.
The manual is 17,37 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.