639294
45
Zoom out
Zoom in
Previous page
1/58
Next page
43
English
Appendices
Ifceilingmounted,pleaseusecautionwhenopeningthelampaccesspanel.Itisrecom-
mended to wear safety glasses if changing the bulb when ceiling mounted. Caution must
be used to prevent any loose parts from falling out of projector.
Firmly install the lamp assembly as well as its cover.
Iffailingtoinstallthelampbulbsmoothly,takeitdownandtryagain.Ifexcessiveforceis
usedwheninstallingthebulb,theconnectorsmaybedamaged.
Donotdisassembleanyscrewsotherthanthosespecied.
1. Turnoffthepowerinaccordancewiththeproceduresspeciedinthe“Turningoffthe
Projector”. Unplug power cord from the power socket on the wall. Wait for at least one
houruntilitisconrmedthatthelampcomponentsanditssurroundingshavebeen
completely cooled.
2. Unscrewthexingscrewsoflampcomponentscoverplatewithcrossheadscrewdriver,
and then open the lamp components cover plate.
●Slowlypulloutthelampcomponentscoverplateaccordingtothedirectionofarrow.
3. Unscrewtwoxingscrewsoflampcomponentswithcrossheadscrewdriveruntilthe
screwsarecompletelyloose.Holdthehandle,andgentlypullupthelampcomponents
from the projector.
4. Inserttheunusedlampcomponentsinthecorrectdirection.Tightenthetwoxing
screws of lamp components with cross head screwdriver.
5. Closethelampcomponentscoverplateandtightenitsxingscrewswithcrosshead
screwdriver.
Reset the lamp usage time
Afterreplacingthelampcomponents,resetusagetimein[Clearthelampusagetime]
menu.
Lamp Replacement Procedure
Lamp component
cover plate
Handle
Fixing screws of lamp
component
Fixing screws of lamp com-
ponent cover plate
Caution: If the lamp
shouldbreak,handlewith
care to avoid injury due to
broken pieces and contact
your sales representative
for repair service.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh PJ RX300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh PJ RX300 in the language / languages: English as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh PJ RX300

Ricoh PJ RX300 User Manual - German - 58 pages

Ricoh PJ RX300 User Manual - Dutch - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info