639294
42
Zoom out
Zoom in
Previous page
1/58
Next page
40
English
User Controls
On
Displays the lamp warning
message.
Off
The warning lamp message will not
be displayed.
Attention
If[LampLifeReminder]issetto[Off],thelampwarn- y
ing message will not be displayed when the lamp
usedtimereachestheendoflamplife.Inthiscase,
please check the lamp life with the values at the
[Lamp Hours Used (Normal)] and [Lamp Hours Used
(ECO)].
Lamp Power Mode
Selects desired lamp power mode under different y
situations.
Press ▲▼ to select [Lamp Power Mode].1)
Press ►, <2) Input/Enter> or <Enter> to display
the setting dialog box.
Press ◄► to select the desired item.3)
Normal Normal brightness.
Auto
The brightness level of the content
is automatically detected to
signicantlyreducedlamppower
consumption during periods of
inactivity.
ECO1
Lower brightness reduces the lamp
power consumption and extends
the lamp life.
ECO2
Lowest brightness reduces the
lamp power consumption and
extends the lamp life.
Note
Whenthereisnosignalformorethan5minutes,the y
lamp power will be decreased automatically for power
saving.
Clear Lamp Hours
Reset the lamp usage time after replacing the y
lamp unit.
Press ▲▼ to select [Clear Lamp Hours].1)
Press ►, <2) Input/Enter> or <Enter> to display
the setting dialog box.
Press ▲▼ to switch [Yes]/[No].3)
Press ►, <4) Input/Enter> or <Enter> to ex-
ecute.
High Altitude
Set to [On] when the projector is used at elevation
between approx. 1 000 m (3 300 ft) and approx. 3 000
m (10 000 ft).
Press ▲▼ to select [High Altitude].1)
Press ►, <2) Input/Enter> or <Enter> to display
the adjustment dialog box.
Press ◄► to switch [On]/[Off].3)
On
For the elevation between approx. 1
000 m (3 300 ft) and approx. 3 000
m (10 000 ft).
Off
For the elevation below approx. 1
000 m (3 300 ft).
Note
When[On]isselected,thespeedandthenoiseofthe y
fan will increase. Do not use this projector in place
elevation is over 3000m (10000ft).
Dust Filter Reminder
Setthecleaningcycleoftheltersandresettheuse
timeofthelters.
Press ▲▼ to select [Dust Filter Reminder].1)
Press ►, <2) Input/Enter> or <Enter> to display
the setting dialog box.
Filters Remind (Hour)
Set the interval timer to display the Dust Filter y
Reminder message.
Press ▲▼ to select [Filters Remind].1)
Press ►, <2) Input/Enter> or <Enter> to display
the adjustment dialog box.
Press ◄► to set the time.3)
Whensetto0(Hour),thisfunctionisdisabled. y
The factory default is 0 hour. y
You can set the time in between 50 hours and y
1000 hours.
Cleaning up Reminder
Resettheairlterusedtimetozero. y
Resettheairlterhourcounteraftercleaningor y
replacingthedustlter.
Press ▲▼ to select [Cleaning up Remind-1)
er].
Press ►, <2) Input/Enter> or <Enter> to display
the setting dialog box.
Press ▲▼ to switch [Yes]/[No].3)
Press ►, <4) Input/Enter> or <Enter> to ex-
ecute.
Note
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh PJ RX300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh PJ RX300 in the language / languages: English as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh PJ RX300

Ricoh PJ RX300 User Manual - German - 58 pages

Ricoh PJ RX300 User Manual - Dutch - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info