639332
55
Zoom out
Zoom in
Previous page
1/81
Next page
55
3D Display
Select the 3D relating settings.
3D Enable:
- Off: Disable 3D function.
- On: Enable 3D function, Supports frame sequential 3D at 120Hz.
3D Invert: When 3D synchronous error, user can toggle the item to correct 3D
synchronous.
NOTE:
3D supported format timings:1280x720@120Hz, 1024x768@120Hz frame sequential.
When input timing is 120 Hz frame sequential, the keystone and color temperature function will be disable temporary.
Color Matching
You may require a unique color gamut (range) for a single projector or application,
or you may need to precisely match colors across multiple adjacent displays. Use
Color Matching by Meter Adjustment or by Manual Adjustment to dene the precise
hue of each primary color component (red, green, blue and white).
The x/y coordinates for each color dene its location on the standard CIE chro-
maticity graph. Changing either or both of these numbers will change the hue of
the color, and modify the range of possible colors. For example, changing the x/y
coordinates for red may move the color closer to orange or closer to violet, which
will in turn affect all displayed colors having a red component. Adjust the slide bars
or enter new specic coordinates as desired to dene or change the color gamuts
needed for your environment and applications.
Enable the selected method (Meter or Manual Adjustment)- this will automatically
disable the other method. For both methods, if Auto Test Pattern is enabled, the
solid colored test pattern will be displayed according to the menu item on which you
are positioned.
If the Auto Test Pattern is enabled, the projector will automatically project a solid
color screen when user selects the desired color in Color Matching setting.
For example:
- When “Red Part of Red” is highlighted, the projector is automatically
projected the red screen.
- When “Red Part of White” is highlighted, the projector is automatically
projected the white screen.
Meter Adjustment
1. Using a color meter, enter the current x and y co-ordinates of Red, Green,
Blue and White for the projector image into the Measured Data menu. This
is the reference point for the projector. The default values in the menu are
based on the average for all projectors.
2. After measuring the values for all the projectors to be matched, calculate
the target values.
3. Enter the target values for x, y and gain for each color into the Target Data
menu.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh PJ LW6000 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh PJ LW6000 Series in the language / languages: English as an attachment in your email.

The manual is 11,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh PJ LW6000 Series

Ricoh PJ LW6000 Series User Manual - German - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info