639658
133
Zoom out
Zoom in
Previous page
1/192
Next page
If you use an FA film in an environment where the temperature is 15 °C or below, fusibility may
deteriorate. If this happens, contact your service representative.
Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a
misfeed.
If you load thin paper (64g/m
2
or less) in a cross-grain direction, white spots and patchy images
may appear. If this happens, turn the paper 90 degrees to load it in the grain direction.
If you load paper of the same size in the same orientation in two or more trays, the machine
automatically shifts to the other tray - except the bypass tray - when the first tray in use runs out of
paper. This function is called "Auto Tray Switching". This saves interrupting a copy run to replenish
paper when making a large number of copies. See "System Settings", Connecting the Machine/
System Settings. For the setting procedure of the Auto Tray Switching function, see "Copier/
Document Server Features", Copy/ Document Server.
If stackability is low when translucent paper (bond or vellum) is used, try loading the paper upside
down in the tray.
Paper Roll
Use a paper roll that has a black core. You cannot use a paper roll with a non-black paper tube or
a paper roll where the trailing edge of the paper is glued to the paper tube. Do not use it, because
doing so will cause a paper jam when the paper runs out as well as cause other problems.
If humidity is high, and the paper roll has expanded due to moisture, be sure to cut off with scissors
approximately 1000 mm (40 inches) before making copies or printing. Then load the paper roll,
and select [Cut] on the screen.
Depending on the paper being used, a horizontal misregistration may occur. If this happens,
contact your service representative.
Cut Paper
If pre-printed paper is used for copying and the pre-printed part is thick, spots, faint printing,
wrinkles, and paper jam may occur. If this is the case, copy on the back of the paper or feed the
paper in a back-to-front orientation.
Straighten curled or warped paper before loading.
To prevent multiple-sheet fed simultaneously, fan the paper before loading it in the tray.
Do not load paper over the limit mark of the paper tray.
Make sure the leading edges of the sheets are aligned to the front of the paper tray.
When using thin paper between 60 and 74 g/m
2
(52 to 64 kg), be sure to load it in a grain
direction.
When using paper with marked grains in a high temperature or humidity, load the paper in a grain
direction.
Recommended Paper
131
133


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh MP W7100SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh MP W7100SP in the language / languages: English as an attachment in your email.

The manual is 6,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh MP W7100SP

Ricoh MP W7100SP User Manual - German - 204 pages

Ricoh MP W7100SP User Manual - Dutch - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info