639639
148
Zoom out
Zoom in
Previous page
1/228
Next page
Specify [Label Paper] for paper type and select an appropriate paper thickness in [Tray Paper
Settings].
When loading OHP transparencies:
We recommend that you use specified OHP transparencies.
When copying onto OHP transparencies, see "Copying onto OHP Transparencies", Copy/
Document Server.
When printing on OHP transparencies from the computer, see page 137 "Specifying thick
paper, thin paper, or OHP transparencies for paper type using the control panel".
Fan OHP transparencies thoroughly whenever you use them. This prevents OHP
transparencies from sticking together, and from feeding incorrectly.
Remove copied or printed sheets one by one.
When loading coated paper:
To print on coated paper: press the [User Tools/Counter] key, press [Tray Paper Settings],
and then, for each tray's [Paper Type] be sure to specify [Paper Type] to [Coated: Matted],
and [Paper Thickness] to the appropriate paper thickness.
To print on high-gloss coated paper: press the [User Tools/Counter] key, press [Tray Paper
Settings], and then, for each tray's [Paper Type], be sure to set [Paper Type] to [Coated:
Glossy].
When loading coated paper or glossy paper, always fan the paper before using it.
If a paper jam occurs or if the machine makes a strange noise when feeding stacks of coated
paper, feed the coated paper from the bypass tray one sheet at a time.
Thick paper
This section gives you various details about and recommendations concerning thick paper.
When loading thick paper of 106–220 g/m
2
(28 lb. Bond–80 lb. Cover) in Trays 1–4 or 106–256
g/m
2
(28 lb. Bond–140 lb. Index) in the bypass tray, follow the recommendations below to prevent
misfeeds and loss of image quality.
Store all your paper in the same environment - a room where the temperature is 20–25°C (68–
77°F) and the humidity is 30–65%.
When loading thick paper into Trays 1–4, be sure to load at least 20 sheets. Also, be sure to
position the side fences flush against the paper stack.
Jams and misfeeds can occur when printing on thick smooth paper. To prevent such problems, be
sure to fan smooth paper thoroughly before loading them. If paper continues to become jammed or
feed in together even after they are fanned, load them one by one from the bypass tray.
When loading thick paper, set the paper direction according to its grain, as shown in the following
diagram.
9. Adding Paper and Toner
146
148


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh MP C401SRSP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh MP C401SRSP in the language / languages: English as an attachment in your email.

The manual is 14,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh MP C401SRSP

Ricoh MP C401SRSP User Manual - German - 244 pages

Ricoh MP C401SRSP User Manual - Dutch - 240 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info