639634
140
Zoom out
Zoom in
Previous page
1/216
Next page
Remove copied or printed sheets one by one.
When loading translucent paper:
When loading translucent paper, always use long grain paper, and set the paper direction
according to the grain.
Translucent paper easily absorbs humidity and becomes curled. Remove curl in the translucent
paper before loading.
Remove copied or printed sheets one by one.
When loading coated paper:
To print on coated paper from the bypass tray or paper trays: press [User Tools], press [Tray
Paper Settings], and then, for each tray's [Paper Type] be sure to specify [Coated Paper] for
[Paper Type]. Specify the thickness of the paper under [Paper Thickness] according to the
weight of the paper you are printing on.
When loading coated sheets, fan them for each use.
If coated sheets of paper jam, make noise, or if more than one sheet is fed at a time, feed
them from the bypass tray one at a time.
Thick paper
This section gives you various details about and recommendations concerning thick paper.
When loading thick paper of 106–163 g/m
2
(28 lb. Bond–90 lb. Index) in the paper trays, or 106–
220 g/m
2
(28 lb. Bond–80 lb. Cover) in the bypass tray, follow the recommendations below to
prevent misfeeds and loss of image quality.
Store all your paper in the same environment - a room where the temperature is 20–25°C (68–
77°F) and the humidity is 30–65%.
When loading paper in the paper trays, be sure to load at least 20 sheets. Also, be sure to position
the side fences flush against the paper stack.
Jams and misfeeds can occur when printing on thick smooth paper. To prevent such problems, be
sure to fan smooth paper thoroughly before loading them. If paper continues to become jammed or
feed in together even after they are fanned, load them one by one from the bypass tray.
When loading thick paper, set the paper direction according to its grain, as shown in the following
diagram:
Direction of paper grain Paper trays Bypass tray
Not
recommended
9. Adding Paper and Toner
138
140


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh MP C306SZP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh MP C306SZP in the language / languages: English as an attachment in your email.

The manual is 13,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh MP C306SZP

Ricoh MP C306SZP User Manual - German - 228 pages

Ricoh MP C306SZP User Manual - Dutch - 288 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info