459414
192
Zoom out
Zoom in
Previous page
1/204
Next page
Specifications
180
8
*6
Press [Bypass], and the {
{{
{#}
}}
} key, and then enter the paper size using the number keys.
*7
If you wish to copy onto OHP transparencies or thick paper, select OHP or Thick
Paper.
*8
The optional B4 JIS/8
1
/
2
" × 14" tray unit is required to load B4 JIS/8
1
/
2
" × 14" size
paper. (2,500 sheets can be loaded in this tray.)
*9
When loading paper, make sure the stack height does not exceed the lower limit
mark of the paper tray. The amount of paper that can be set is 10 mm/100 sheets ap-
proximately. See p.107 B Loading Paper.
*10
It is recommended to place one sheet at a time.
*11
Depending on the paper thickness, the actual paper capacity may be less than speci-
fied.
When loading translucent papers, set the paper direction according to the grain.
Important
If you use damp or curled paper, a misfeed may occur.
Note
When loading paper in the paper trays 1-3, place the copy side face down.
When loading paper in the large capacity tray (LCT), place the copy side face
down.
When loading paper in the bypass tray, place the copy side face up.
When you use the bypass tray, it is recommended to set the copy paper direc-
tion to L.
Do not use paper for inkjet printers.
Do not use Color OHP transparencies with coatings that are easily melted by
heat.
To prioritize image quality when printing on OHP transparencies, make sure
you adjust the guides in the tray to A4K or 8
1
/
2
×11K, and specify
[Tray Paper Size: ] in User Tools menu.
When you load OHP transparencies, check the front and back of the sheets,
and place them correctly, or a misfeed might occur. Set the paper direction to
K. For details, see Copy Reference.
When you use OHP transparencies, fan them for each use.
We recommend that you use a 4000ANSI lumen or brighter overhead projec-
tor to project OHP transparencies.
If multiple sheet feeding occurs, load sheets one by one.
When you load label paper, set the paper direction to K.
ZGJS870E
VenusC1_EN_zen_Pre_FM.book Page 180 Monday, April 18, 2005 4:49 PM
192


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh LC 155 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh LC 155 in the language / languages: English as an attachment in your email.

The manual is 6,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info