104103
184
Zoom out
Zoom in
Previous page
1/204
Next page
182
The flash does not fire. Or
the flash cannot recharge.
Flashing is prohibited in the following
statuses:
- White Balance Bracket enabled
- Continuous Shooting Mode
- Movie Mode
For shooting with the flash, change the
settings or mode.
P. 8 1
P.101
P.105
The flash is set to Flash Off. Deselect the Flash Off with the F
button.
P. 4 4
Batteries are running low. If using alkaline batteries, replace the
batteries with a new set. If using
rechargeable batteries, recharge or use
the AC Adapter.
P. 1 9
Your hand is on the popup or strobe
section of the flash.
Keep your hand away. P.14
The popup section of the flash is not
completely open.
Take corrective measures against the
popup failure (such as adjusting the
external flash).
P. 4 5
Even though the flash
fired, the picture is dark.
The distance to the subject is greater
than 2.9 meters.
Get closer to your subject and shoot. P.44
The subject is dark. Correct exposure. (Exposure correction
also changes the light quantity of the
flash.)
P. 8 7
The image is too bright. The light quantity of the flash is not
appropriate.
Move a little away from the subject or
light up the subject for shooting without
flashing.
P. 4 4
It is over-exposed. Use exposure compensation. Cancel
Time Exposure.
P. 8 7
The brightness of the LCD monitor is
not appropriate.
Adjust the brightness of the LCD
Monitor.
P.126
The image is too dark. The shot was taken in a dark place
while set to (Flash Off).
Deselect the Flash Off with the F button. P.44
It is under-exposed. Use exposure compensation. Set to
Time Exposure.
P. 8 7
The brightness of the LCD monitor is
not appropriate.
Adjust the brightness of the LCD
Monitor.
P.126
The image lacks natural
color.
The picture was shot in conditions
that are hard for Auto White Balance
to adjust to.
Add a white object to the composition.
Or use a White Balance setting other
than Auto.
P. 8 8
The date, or recording
information does not
appear.
The screen display function is set to
No Display.
Press the DISP. button and switch
display.
P. 3 2
The brightness of the LCD
Monitor changes during
AF.
You are using it in a dark place or
when Auto Focus range and
surrounding brightness are different.
This is normal. -
There is a vertical smear
on the image.
This is a phenomenon that occurs
when a bright subject is shot. It is
called the smear phenomenon.
This is normal. -
Symptom Cause Remedy
Refer
to
184


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh GR Digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh GR Digital in the language / languages: English as an attachment in your email.

The manual is 5,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh GR Digital

Ricoh GR Digital User Manual - German - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info