Manual Ricoh GF-1 TTL (page 15 of 116) (English, German, French, Italian, Spanish)

580414

Zoom out

Zoom in

1/116

EN - 14

SLAVE1: Mode for cameras with a pre-ash (triggered once)

and a main ash (Type R and other cameras)

SLAVE2:

Mode for cameras with a main ash only

Following is the explanation for how to use the camera's

built-in ash as a trigger.

Type R cameras

If you are using the camera’s built-in ash as a trigger, do not

attach this ash unit to the hot shoe. The built-in ash may not

be able to open.

1 Turn on the power of the camera and the ash unit and set the

ash to always re.

Set the ash mode to SLAVE1 with the Mode select button.

When set to slave mode, the ash unit’s AF auxiliary light

blinks.

3 Set the ash power level to Ambient light auto (F2.8 to 5.6) or

Manual ash (1/4 or FULL) with the Flash power level select

button.

Caution

The camera's Red-eye ash function is not available.

When using Ambient light auto

Set the aperture value.

Manually select the aperture on the camera to match the

aperture value selected on the ash unit. If the camera does

not oer the exact same value, select the closest value. When

using a zoom lens, check the aperture value again after

adjusting the zoom and correct the aperture value if necessary.

2 Use the supplied ash stand or other device to place the ash

unit at the desired location and adjust its angle as desired.

3 Press the camera's shutter release button once to check that

the ash res under the conditions selected.

If the ash does not re, verify the position of the slave sensor

and the operating distance.

If after checking the results of a test shot the image is too dark,

select a smaller aperture value on the camera. If it is too bright,

select a larger aperture value instead.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh GF-1 TTL in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ricoh GF-1 TTL Manual

Product: