490362
162
Zoom out
Zoom in
Previous page
1/197
Next page
161
Appendices
17
Error Message Cause and Solution Refer to
The IP address is already in use The same IP address as the camera exists in the destination
network. Check the [IP address] in the Detailed Setups
[Networks] tab.
P.116
Conflicting LAN setting The first destination sent to after turning the camera on
and the setting in the Detailed Settings [Network] tab or
[Wireless LAN] tab is different. To send to a destination
different from the setting in the [Network] or [Wireless
LAN] tab, change the destination in advance and restart
the camera.
P.116,
P.117
Destination not registered The communication list has not been imported by the
camera. Import the communication list into the camera
and try again.
P.123
Invalid key size. When [Crypt/Authentication] in [W/less LAN] is changed
on the camera, check the network key.
• If [WEP/OPEN] or [WEP/SHARED] is selected for [Crypt/
Authentication], enter the [Network Key] as below.
[String]: Five characters or 13 characters
[Hex]: Ten characters or 26 characters
• If [AES/WPA-PSK], [AES/WPA2-PSK], [TKIP/WPA-PSK], or
[TKIP/WPA2-PSK] is selected for [Crypt/Authentication],
the network key must contain 64 characters ([Hex]) or
from 8 to 63 characters ([String]).
P.117,
P.118
Cannot find access point. Camera could not find wireless LAN access point to which it
could connect using [Simple Connection] > [WPS Button]/
[WPS PIN]; check device and confirm that signal is not
blocked and that the access point is within distance of
about 30 m (100 ft.).
P.128
Connection information not
available.
Information required for connection to wireless LAN access
point is not available. Select any option other than [Off] for
[Simple Connection] and try again.
P.128
FTP send setting errors
Error Message Cause and Solution Refer to
No upload server name setting [Server Name] for the destination is not set in the Detailed
Setups [FTP Send] tab. Set the [Server Name] setting.
P.118
Cannot detect IP address Unable to acquire the IP address of the destination server.
Set the correct [Server Name] setting in the Detailed
Setups [FTP Send] tab.
P.118
No response from server The destination server does not respond. Check the
advanced settings on the [FTP Send] tab.
P.118
Cannot connect to server Unable to connect to the destination server. Check the
advanced settings on the [FTP Send] tab
P.118
Setting error either in user name
or password
Incorrect [User Name] or [Password] setting. Set the correct
[User Name] and [Password] settings in the Detailed
Setups [FTP Send] tab.
P.118
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh G700SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh G700SE in the language / languages: English as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh G700SE

Ricoh G700SE User Manual - German - 197 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info