639647
21
Zoom out
Zoom in
Previous page
1/30
Next page
Creating your own printable le: from STL to gcode
19
Nylon Nylon is a generic designation for a family of synthetic polymers known
generically as aliphatic polyamides. Nylon is one of the most commonly
used polymers. It has self-lubricating properties which can be useful in
for example bearings. The material is very tough and light. It is also able to
withstand higher stress than most other printable plastics making it more
suitable for engineering applications.
Brick Brick Filament contains small brick bers, which makes your 3D print
look like it is made from sandstone. Architects make beautiful brick-like
structures with this.
3.7 Overview advanced print settings
If you are ready to start printing with advanced settings, consult the website of Simplify3d. On
https://www.simplify3d.com/support/ you can nd manuals and support regarding the software.
3.8 Controlling your printer with Simplify3d – printing while connected to your computer
While the Creatr HS is a standalone 3D printer, which can print with the input from a USB stick,
you can also opt to use it connected to your computer. If you want to calibrate your printer with
your computer, connecting is necessary. Other
benets of printing while you are connected to
your printer is that you can override the gcode
settings while printing. For example, if you see
too little lament coming out of the print at one
point (under-extrusion), you can increase the
extrusion ow.
To print with the computer attached, you need
to follow these steps:
STEP 1: Connect the computer to the backside
of the Creatr HS using the provided USB cable.
STEP 2: In the ‘Tools’ tab, select ‘Firmware con-
guration. In the ‘Communication’ tab select
set the serial cache size to 255 bytes. Press
save.
STEP 3: In the Machine Control Panel you can
see which COM port auto selected. Verify that
the baud rate is set to 115200. Click on the
Connect” button. If the connect button turns
from a red “Connect” to a green “Disconnect”
you are connected.
STEP 2: Firmware conguration
STEP 3: Connect Simplify3d to your printer
STEP 1: Connect your printer
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Creatr HS - Leapfrog at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Creatr HS - Leapfrog in the language / languages: English as an attachment in your email.

The manual is 9,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Creatr HS - Leapfrog

Ricoh Creatr HS - Leapfrog User Manual - German - 30 pages

Ricoh Creatr HS - Leapfrog User Manual - Dutch - 30 pages

Ricoh Creatr HS - Leapfrog User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info