639647
18
Zoom out
Zoom in
Previous page
1/30
Next page
Creating your own printable le: from STL to gcode
16
Creating your own printable le: from STL to gcode
3.5.2 Applying support structures to your stl model
You can either dene the support structures manually or you can have Simplify3d place support for
you on all parts where there is a 45 degrees overhang. It is benecial to use the minimum amount
of support structures that are required as this will keep the surface of your print as smooth as pos-
sible.
You always apply support structures to your stl model, not to your gcode (so you have to do this
before or during the slicing procedure).
To add support, click on the “manually dene support for model” button in your toolbar or in the
menu under “tools”. If you want to manually dene support, choose add new support structures”
and place the support structures where you see t by left-clicking locations underneath the model.
The other option is to have Simplify3d place support for you automatically by selecting the option
apply based on overhang angle.
To dene the proper process, click ‘add process’ and select a process for ‘Dual Support’, with your
desired material and detail properties (fast, medium, or detailed). This loads the prole in which the
right extruder is primary and the left extruder will generate the support material.
3.5.3 How to print with dual extrusion
When you would like to print with dual extrusion, you need to follow the general slicing steps as in
paragraph 4.2. If you use two types of materials, you need to make two different slicing processes
and connect the right process to the correct extruder as shown on page 17.
Generating support for your 3D model.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Creatr HS - Leapfrog at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Creatr HS - Leapfrog in the language / languages: English as an attachment in your email.

The manual is 9,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Creatr HS - Leapfrog

Ricoh Creatr HS - Leapfrog User Manual - German - 30 pages

Ricoh Creatr HS - Leapfrog User Manual - Dutch - 30 pages

Ricoh Creatr HS - Leapfrog User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info