Manual Ricoh Creatr HS - Leapfrog (page 11 of 30) (English)

639647

Zoom out

Zoom in

1/30

Preparing for your next print

Making your very rst 3D print – Quick Print Guide

2. Preparing for your next print

In this chapter we will take you through the processes of preparing your printer for your next print.

We will take you through the processes of replacing your print sticker, exchanging your lament

and we will offer you to methods of calibrating your machine: manually and through using Simpli-

fy3d.

2.1. Removing your print and replacing your print sticker

2.2. Changing lament

2.1 Removing your print and replacing your print sticker

The print bed of the Creatr HS is made out of glass to ensure that it is as at as possible. However,

it is sometimes difcult to keep your print stuck to it. To make sure that your print sticks to the bed,

you need to apply a print sticker. You can re-use your sticker for prints over and over again as long

as it is not damaged. Even when it is damaged, you could opt to place your print on another section

of the bed where the sticker is not damaged yet (in order to learn how to do this, revert to Chapter

4 where we cover the Simplify3d software).

TIP: Removing your print from the bed: You can use a putty knife to make it easier to

remove your printed object. If the print still sticks on the print bed, heating up the print

bed to 40 degrees Celsius (see quick start) can make it easier to remove prints.

STEP 1: Check whether your print sticker is damaged or not. If it is damaged in one place, you may

also position your print on a different, undamaged area of the bed ( you can do this while slicing

your print in Simplify3d).

STEP 2: If the print sticker is damaged and you cannot position your print on an undamaged spot,

remove the sticker by lifting one of the corners of the sticker and pealing it off. If you remove it too

quickly, the sticker is more likely to tear.

STEP 3: Remove the sticker glue by applying sticker remover or glass cleaner on the print bed. Be

sure to remove the whole sticker and all of the sticker glue so you will end up with a clean glass

plate. If residue is left behind, this could affect your print quality.

TIP: Use some abrasive soap with your putty knife on a cold (non-heated) print bed.

STEP 4: Apply the new sticker by placing the sticker on your print bed. If you are satised with the

position, take of the small part of the sticker. Use a plastic card to apply the sticker, work from the

inside to the outside and avoid air bubbles. Take off the big part slowly and use a plastic card to ap-

ply the sticker, work from the inside to the outside.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Creatr HS - Leapfrog in the language / languages: English as an attachment in your email.

The manual is 9,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Creatr HS - Leapfrog

Ricoh Creatr HS - Leapfrog User Manual - German - 30 pages

Ricoh Creatr HS - Leapfrog User Manual - Dutch - 30 pages

Ricoh Creatr HS - Leapfrog User Manual - French - 30 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ricoh Creatr HS - Leapfrog Manual

Product: