104072
11
Zoom out
Zoom in
Previous page
1/28
Next page
51
3
SHOOTING
1
Set the mode dial to [ ] or [ ].
2
Press the button to select the ash
mode ( , Auto, (No display), lit,
blinking).
The flash mode will change each time the button is
pressed.
3
Press the shutter release button.
When the flash fires, the flash LED (red) will light
when the shutter release button is pressed lightly.
The flash LED blinks while the flash is being charged
and the display disappears from the LCD monitor.
Pictures cannot be taken at this time.
If you use the flash when taking a subject at close range (about
0.6m or less), the light from the flash may appear red. This
also causes overexposure so the subject may appear white in
the picture. At such times, select Flash Off mode.
The shutter speed will automatically become slower in low
light conditions. Hold the camera steady to avoid camera
shake. Be particularly careful when using Tele mode ( ).
The flash will not fire in the following cases.
- When the recording mode is set to Continuous Shooting,
Motion Picture or Voice Memo
- When the white balance is set to daylight, overcast, tungsten
or fluorescent lighting
Effective Range of the Flash
When you record an image using the ash, the effective range
of the ash is about 0.6-2.0m in Tele mode and 0.6-2.5m in
Wide mode. If the light from the ash does not reach the
subject, the subject will appear dark in the image.
Enable the keep settings
mode to save the flash mode
setting. See “Keep Settings”
(p.96).
Shooting in red-eye
reduction mode will reduce
the phenomenon of red eyes
in the resulting picture. See
“Red-eye Reduction Mode”
(p.62).
Note
N 1600
25
2001/07/15 11:25
Important
Note
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Caplio RR 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Caplio RR 10 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Caplio RR 10

Ricoh Caplio RR 10 Additional guide - English - 27 pages

Ricoh Caplio RR 10 Additional guide - English - 12 pages

Ricoh Caplio RR 10 Additional guide - English - 26 pages

Ricoh Caplio RR 10 Additional guide - English - 12 pages

Ricoh Caplio RR 10 Additional guide - English - 10 pages

Ricoh Caplio RR 10 User Manual - English - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info