104070
16
Zoom out
Zoom in
Previous page
1/16
Next page
Chapter
5
SETTINGS/MISCELLANEOUS
Changing Camera Settings................................. 120
Formatting a Card/Internal Memory ........................... 120
Keep Settings ............................................................ 121
Changing LCD Confirmation Time ............................. 122
Auto Power Off Setting............................................... 123
Beep Sound Setting ................................................... 124
Power Save Mode Setting .......................................... 124
Changing the File Numbering System ....................... 125
Changing Video-Out Signal Method (NTSC/PAL) ...... 126
Changing Display Language ...................................... 127
Initializing Settings ..................................................... 127
Using the Remote Control .................................. 129
Shooting ..................................................................... 129
Playing ....................................................................... 131
Erasing ....................................................................... 132
120
FORMAT
SET 1/3
SELECT: CHANGE:
SEL.:ENTER
KEEP SETTINGS
LCD CONFIRMATION 1SEC.
BEEP SOUND ON
AUTO POWER OFF 1MIN
This section explains how to format (initialize) a
SmartMedia memory card or the internal memory, and
how to change the various settings such as auto power
off, beep sound and keep settings.
Formatting a Card/Internal Memory
Follow the procedure below to format a SmartMedia
memory card or the internal memory.
Before using a new SmartMedia memory card or a
SmartMedia memory card that has been used on
another device (such as a PC), you need to format it
with the camera.
Important
Note
Formatting a SmartMedia memory card or the internal memory will
erase all the files recorded on the card or in the memory (including
protected files). Copy any important files before formatting. See
Copying Image Files (p.103).
SmartMedia memory cards formatted on another device may be
unusable.
1
Set the mode dial to [ ].
2
Press the or button to select
[FORMAT] and press the ENTER button.
Changing Camera Settings
Note
A SmartMedia memory card
with a write protect pad
attached to it cannot be
formatted. Remove the pad
to format the SmartMedia
memory card. See
Protecting Against
Accidental Writing (p. 26).
121
Settings/Miscellaneous
5
3
Press the or button to select
SmartMedia memory card or internal
memory and press the ENTER button.
4
The FORMATTING message will be displayed.
When formatting is completed, the display will
return to the SET menu.
Keep Settings
The keep settings mode is for saving settings after the
camera is turned off. The following settings can be
saved.
Flash mode (p.60)
Exposure compensation
(p.62)
White balance (p.64)
Date imprint (p.74)
Language (p.127)
Recording destination
(CARD/IN) (p.46)
Focus mode (p.70)
ISO sensitivity (p.73)
Flash strength (p.61)
Sharpness mode (p.79)
FORMAT
MEMORY CARD
START:RELEASE
CANCEL:CANCEL
FORMAT
FORMAT
FORMAT MEMORY CARD
BACK:CANCEL SEL.:ENTER
FORMAT INTERNAL MEMORY
Image with sound (p.58)
Monochrome mode (p.80)
Non-Compressed mode (p.84)
Exposure metering system
(Photometry) (p.86)
S mode (p.87)
Time Exposure mode (p.88)
Negative mode(p.81)
Red-Eye Reduction mode
(p.72)
122
FORMAT
SET 1/3
SELECT: CHANGE:
SEL.:ENTER
KEEP SETTINGS
LCD CONFIRMATION 1SEC.
BEEP SOUND ON
AUTO POWER OFF 1MIN
1
Set the mode dial to [ ].
2
Press the or button to select [KEEP
SETTINGS] and press the ENTER button.
3
Press the or button to select the item
to be saved.
4
Press the or button to select [ON].
Keep Setting will be activated. To set more items,
repeat steps
3
and
4
.
5
Press the ENTER button.
The display will return to the SET menu.
Changing LCD Confirmation Time
When you press the shutter release button to take a
picture in
(Still Picture) mode, the shot image
appears on the LCD monitor. You can select the time
for confirming the image after shooting to 0 sec., 1 sec.,
2 sec., 3 sec., 4 sec. and 5 sec.
1
Set the mode dial to [ ].
FLASH ON
KEEP SETTINGS
1/4
+
/– OFF
DATE IMPRINT OFF
LANGUAGE OFF
SELECT: CHANGE:
BACK:CANCEL SEL.:ENTER
WHITE BALANCE OFF
Note
To cancel the setting, select
[OFF].
Note
If you select 0 sec. for the
image confirmation time, the
shot image will not be
displayed on the LCD
monitor.
The shot image will be
displayed until recording is
completed, regardless of the
preset image confirmation
time, when taking still picture/
text with sound, or when in
non-compressed (NC) mode.
123
Settings/Miscellaneous
5
2
Press the or button to select [LCD
CONFIRMATION].
3
Press the or button to select the
image confirmation time (0 SEC., 1 SEC., 2
SEC., 3 SEC., 4 SEC., 5 SEC.) and press the
ENTER button.
Auto Power Off Setting
The camera will turn off automatically (auto power off) in
recording and playback modes to conserve the battery if
it is left idle (no buttons operated) for the preset time.
You can select from 1 min., 3 min., 5 min., and OFF for
the time until the auto power off function is activated.
1
Set the mode dial to [ ].
2
Press the or button to select [AUTO
POWER OFF].
3
Press the or button to select the
preset time (1 MIN, 3 MIN, 5 MIN, OFF) and
press the ENTER button.
If you select OFF, the auto power off function will
be disabled.
FORMAT
SET 1/3
SELECT: CHANGE:
SEL.:ENTER
KEEP SETTINGS
LCD CONFIRMATION 1SEC.
BEEP SOUND ON
AUTO POWER OFF 1MIN
Note
Turn the power on again to
reactivate the camera if it
shuts off in auto power off
mode.
When using an AC adapter
(option), the auto power off
function is disabled even if
you have set a time (except
for interval shooting).
FORMAT
SET 1/3
SELECT: CHANGE:
SEL.:ENTER
KEEP SETTINGS
LCD CONFIRMATION 1SEC.
BEEP SOUND ON
AUTO POWER OFF 1MIN
124
Beep Sound Setting
The camera beeps to alert you when it records a
picture. You can enable or disable the beep by
changing the setting.
1
Set the mode dial to [ ].
2
Press the or button to select [BEEP
SOUND].
3
Press the or button to select [ON] or
[OFF] and press the ENTER button.
If you select [OFF], the beep sound will be disabled.
Power Save Mode Setting
This mode is used to conserve power consumed by the
LCD monitor and extend the battery life.
1
Set the mode dial to [SET].
2
Press the and buttons to select
[POWER SAVE MODE].
3
Press the or button to select [ON] or
[OFF] and press the ENTER button.
FORMAT
SET 1/3
SELECT: CHANGE:
SEL.:ENTER
KEEP SETTINGS
LCD CONFIRMATION 1SEC.
BEEP SOUND ON
AUTO POWER OFF 1MIN
Note
An error beep is not
suppressed even when
[BEEP SOUND] is set to
[OFF].
Note
This mode is used to save
10% power consumption
compared with the normal
mode.
POWER SAVE MODE ON
SET 2/3
SELECT: CHANGE:
SEL.:ENTER
SEQUENTIAL NO. OFF
DATE SETTING 2001/10/15
LANUAGE ENGLISH
VIDEO OUT MODE NTSC
125
Settings/Miscellaneous
5
Changing the File Numbering System
By enabling or disabling sequential numbering, you can
determine the method for assigning consecutive
numbers to files. In both cases, there is never any
duplication of file names on the same memory card.
When sequential numbering is ON
File names are assigned in sequence from R0010001 to
R9999999.
The camera always remembers the last number
assigned so that even when a new (blank) memory
card is inserted, the camera continues assigning
numbers in sequence from where it left off. In other
words, the numbers are not reset.
However if the new memory card contains a file number
higher than the last one remembered by the camera, file
naming will continue from after this higher number. For
example, if the highest number the camera remembers
is R0020500, and the new memory card contains a file
R0020600, file naming will resume from R0020601.
* To reset sequential numbering so that it will assign file
names from R0010001 again, initialize the settings (p. 127)
and insert a blank memory card.
When sequential numbering is OFF
File names are assigned in sequence from RIMG0001
to RIMG9999, however anytime a new (blank) memory
card is inserted, the numbering resets back to
RIMG0001.
However if the new memory card already contains files,
file naming will begin from after the highest number on
the card. For example, if the new memory card contains
a file RIMG0800, file naming will begin from RIMG0801.
* When the file names reach RIMG9999, [FILE NUMBER
OVER] is displayed and no more images can be recorded.
See “Error Messages” (p.140).
1
Set the mode dial to [ ].
2
Press the or button to select
[SEQUENTIAL NO.].
Note
Numbering starts from
RIMG0001 when the internal
memory is selected as the
recording destination.
Using the consecutive
numbering system (when
[SEQUENTIAL NO.] is [ON])
is useful when submitting
images to digital printing
services or keeping files on a
PC as there is no risk of the
same number being assigned
twice.
126
3
Press the or button to select [ON] or
[OFF] and press the ENTER button.
If you select [OFF], files will be assigned numbers
starting from RIMG0001.
Changing Video-Out Signal Method
(NTSC/PAL)
Switches the video system for connecting the camera to
a TV set to play record images on TV.
See
•“Connecting to a TV (p.90) for instructions on how to connect the
camera to a TV.
•“Using Your Digital Camera in Other Countries (p.144) for
information about the television systems.
1
Set the mode dial to [ ].
2
Press the or button to select [VIDEO
OUT MODE].
3
Press the or button to select [NTSC]
or [PAL] and press the ENTER button.
The video setting will be changed.
POWER SAVE MODE OFF
SET 2/3
SELECT: CHANGE:
SEL.:ENTER
SEQUENTIAL NO. OFF
DATE SETTING 2001/10/15
LANGUAGE ENGLISH
VIDEO OUT MODE NTSC
POWER SAVE MODE OFF
SET 2/3
SELECT: CHANGE:
SEL.:ENTER
SEQUENTIAL NO. OFF
DATE SETTING 2001/10/15
LANGUAGE ENGLISH
VIDEO OUT MODE NTSC
127
Settings/Miscellaneous
5
Changing Display Language
The information on the LCD monitor can be displayed in
English, French, German and Japanese.
1
Set the mode dial to [ ].
2
Press the or button to select
[LANGUAGE].
3
Press the or button to select the
display language and press the ENTER
button.
The language setting will be changed.
Initializing Settings
You can reset all settings except the date.
1
Set the mode dial to [ ].
2
Press the or button to select
[INITIALIZE SETTING] and press the
ENTER button.
POWER SAVE MODE OFF
SET 2/3
SELECT: CHANGE:
SEL.:ENTER
SEQUENTIAL NO. OFF
DATE SETTING 2001/10/15
LANGUAGE ENGLISH
VIDEO OUT MODE NTSC
Note
Enable the keep settings
mode to save the display
language setting. See "Keep
Settings" (p.121).
INITIALIZE SETTING
SET 3/3
SELECT: CHANGE:
SEL.:ENTER
Important
Note
Mode settings that have
been saved will also be
initialized.
128
3
Press the shutter release button.
The settings will be reset to their factory default
settings and the display will return to the SET
menu.
Note
Recorded files are preserved
intact even when the settings
are initialized.
INITIALIZE ALL SETTINGS?
START:RELEASE
CANCEL:CANCEL
INITIALIZE SETTING
129
Settings/Miscellaneous
5
This section explains how to operate the camera using
the optional DR-3 remote control unit.
Shooting
The remote control unit can be used to operate the
camera. It is particularly convenient when the camera is
set up at a remote location or is in a fixed position.
1
Set the mode dial to shooting mode
( ) and press the
button to select the recording destination.
2
Decide the composition of the picture and
press the RELEASE button.
Use the zoom button to vary the size of the
subject. Press the
zoom button to magnify
the subject and press the
zoom button to
decrease the size of the subject.
In
(Still Picture) mode
The self-timer LED will light and recording will
start about 2 seconds later.
(Text) mode
Recording starts as soon as the RELEASE
button is pressed.
In
(Continuous Shooting) mode
Shots will be taken continuously while the
RELEASE button is pressed. Shooting will stop
when the RELEASE button is released and the
shots will be recorded.
Using the Remote Control
RELE ASE
ERASE
FWD
PROGRAM
EV
MULTI
REV
ENTER
Important
Note
The remote control receiver
is located at the upper left of
the LCD monitor. Operate the
remote control unit by
pointing it at the LCD
monitor.
Note
For instructions on replacing
the batteries and maintaining
the remote control unit, refer
to the accompanying manual.
130
In (Sound)/ (Motion Picture) mode
Recording of the sound and image will start
when the RELEASE button is pressed.
Recording will stop when the RELEASE button is
pressed again and the shots will be recorded.
Setting Exposure Compensation
1
Press the EV (+/) button.
2
Set the exposure compensation level using
the FWD (̅) or REV (̃) button and press
the ENTER button.
Press the RELEASE button to take the picture.
Setting the Focus
1
Press the PROGRAM button to select the
desired focus mode.
The focus setting changes in the following
sequence each time the button is pressed: AF
(Auto) MF (Manual) 2.5m
(Infinity).
Press the RELEASE button to take the picture.
How to Cancel the Focus Mode Setting
Press the PROGRAM button and change the
focus mode.
Note
When using MF (Manual)
mode, adjust the focus using
the FWD (̅) and REV (̃)
buttons, then press the
RELEASE button to take the
picture.
134
Erasing Selected Images
1
Select [ERASE SELECTED IMAGES] on the
erase mode screen (step
3
).
2
Use the or button and the FWD (̅)
or REV (̃) button to select the file to be
erased and press the ENTER button.
Repeat step 2 to select more images.
3
Press the RELEASE button.
Note
To cancel selection, press
the ENTER button again.
Note
To cancel operation, press
the CANCEL button on the
camera.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Caplio RR 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Caplio RR 1 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Caplio RR 1

Ricoh Caplio RR 1 Additional guide - English - 26 pages

Ricoh Caplio RR 1 Additional guide - English - 6 pages

Ricoh Caplio RR 1 Additional guide - English - 24 pages

Ricoh Caplio RR 1 User Manual - English - 46 pages

Ricoh Caplio RR 1 Additional guide - English - 24 pages

Ricoh Caplio RR 1 User Manual - English - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info