64947
254
Zoom out
Zoom in
Previous page
1/266
Next page
252
7
Appendices
The camera has a hot shoe, allowing you
to attach an external flash (available in
stores).
1
Close the flash cover (GP.23).
2
With the camera and external
flash powered off, attach the
external flash to the hot shoe.
3
Turn on the camera, turn the mode dial to A or M, and
set the aperture value (GP.87, 89).
4
Set the ISO sensitivity to a value other than [Auto]
(GP.146).
5
Turn on the external flash, turn its mode to Auto, and
set the aperture value and ISO sensitivity to the same
values on the camera.
Be sure to turn off the external flash before detaching the external
flash from the camera.
Caution------------------------------------------------------------------------------------------
Camera shake may occur when using slower shutter speeds.
When using a commercially-available external flash, make sure the flash has the
following specifications.
It must not have a signal terminal other than an X contact.
The polarity of the X contact must be positive (+).
The voltage of the X contact must not exceed 20V.
You cannot use the internal flash when an external flash is attached as this can cause
injury or damage.
You cannot use the LCD viewfinder when an external flash is attached.
Irrespective of flash setting, a flash ON signal is output to the X contact of the hot shoe.
To stop an external flash, use a switch on the flash.
Exposure may not be appropriate even when the aperture value and ISO sensitivity
of the external flash are the same as those of the camera. If so, change the aperture
value and ISO sensitivity of the flash.
Use an external flash with a lighting angle that covers the angle of view of the shooting
lens.
Use an external flash basically at a distance where the internal flash is not adequate
(long distance). Shooting at a short distance with an external flash may result in over-
exposure of the subject.
Using the External Flash
Hot shoe
254


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Caplio GX200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Caplio GX200 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Caplio GX200

Ricoh Caplio GX200 User Manual - German - 266 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info