64947
241
Zoom out
Zoom in
Previous page
1/266
Next page
239
7
Appendices
Even though the flash
fired, the picture is dark.
The distance to the subject
exceeds the flash range.
Get closer to your subject and
shoot. Change the flash mode or
the ISO setting.
P.51
P.146
The subject is dark. Correct the exposure. (Exposure
compensation also changes the
light intensity of the flash.)
P.138
The light intensity of the flash is
not appropriate.
Adjust the light intensity of the
flash.
P.124
P.125
The flash cover is not fully raised. Do not press or cover the flash
cover. Also, return the LCD
viewfinder to the original angle,
and adjust to open the flash.
P.51
The image is too bright. The light intensity of the flash is
not appropriate.
Adjust the light intensity of the
flash. Alternatively, move a little
away from the subject or
illuminate the subject with
another light source instead of
using the flash.
P.124
P.125
Subject is overexposed.
(The [!AE] symbol appears.)
Correct the exposure.
Decrease the exposure time.
Increase the aperture value
(close the aperture). Set [Auto
Aper. Shift] to [On].
P.138
P.89
P.87
P.149
The brightness of the picture
display is not appropriate.
Adjust the brightness of the
picture display.
P.188
The image is too dark. The shot was taken in a dark
place while set to flash off.
Open the flash. Use the F (Flash)
button to cancel flash off.
P.51
The subject is underexposed. Correct the exposure.
Increase the exposure time.
P.138
P.89
The brightness of the picture
display is not appropriate.
Adjust the brightness of the
picture display.
P.188
The image lacks natural
color.
The picture was shot in conditions
that made it difficult for auto white
balance to adjust the white
balance.
Add a white object to the
composition or use a white
balance mode other than [AUTO].
P.140
The date or recording
information does not
appear on the screen.
Display is set to no symbol
display.
Press the DISP. button to change
the display.
P.64
The brightness of the
picture display changes
during AF.
You are using AF in a dark place
or when the auto focus range and
surrounding brightness are
different.
This is normal. -
There is a vertical smear
on the image.
This is a phenomenon that occurs
when a bright subject is shot. It is
called the smear phenomenon.
This is normal. -
Problem Cause Solution Refer to
241


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Caplio GX200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Caplio GX200 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Caplio GX200

Ricoh Caplio GX200 User Manual - German - 266 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info