104043
11
Zoom out
Zoom in
Previous page
1/17
Next page
164
Appendices
About connecting to your computer/software
Symptom Cause Measure
Cannot download
images
Connect your camera via
the USB hub to your
computer.
1. Your camera may not be recognized correctly if you connect to the
USB Port of your computer via a USB hub. Connect it directly to the
USB port of your computer.
Cannot download
images
(Only for Windows98/
98SE/Me)
The COM Port setting is
wrong.
1. Connect your camera to the computer with the USB cable. Open
[System] from inside the [Control Panel], then open the [Device
Manager] in the [System Properties] dialog box.
2. Click the [+] on the left side of [Port COM/LPT] to open, specify
[Ricoh Camera Port] and click [Properties].
3. Click the [Port Select] tab.
4. Select a COM Number not being used from [PortName].The port
currently allocated for your camera is indicated by a "*".
Immediately after installing the USB driver, COM 7 should be
selected, so select a number above COM8.
Cannot download
images
(For all Windows
OS's)
The computer is not
recognizing the camera
correctly.
1. Connect your camera to the computer with the USB cable. Click
[Start] on the Windows task bar.
2. Select [Settings], open [System] from inside the [Control Panel],
then open the [Device Manager] in the [System Properties] dialog
box.
If using the Windows2000/XP, click the [Hardware] tab then click the [Device
Manager] button.
3. Click the [+] on the left side of [Other Devices] and make sure there
is not a [Caplio G3 ] below it. If there is, click the [Delete(E:)] button
to delete it.
Select [Caplio Software] from [Add/Remove Applications] of the
[Control Panel], click the [Add/Remove] button and then install the
software.
4. Turn off your camera and computer.
5. Turn your computer back on and reinstall the software from the CD-
ROM. (At this time, do not connect the camera.)
Next, connect the camera to the computer with the USB cable.
When the computer recognizes the camera, the [New Hardware]
screen launches and your camera is registered by the computer.
Cannot download
images
(For Windows98/
98SE/Me)
The computer is not
recognizing the camera
correctly.
1. Connect your camera and computer with the USB cable. Click
[Start] on the Windows task bar.
2. Select [Settings], open [System] from inside the [Control Panel],
then open the [Device Manager] in the [System Properties] dialog
box.
3. Click the [+] on the left side of [Port COM/LPT] to open, and click
whether or not there is an Unknown Device symbol (!) indicated for
[Ricoh Camera Port]. Alternately, check if there is an Unknown
Device symbol (!) indicated for [RICOH USB Virtual COM] under
[Universal Serial Controller]. If there is, click the [Delete(E:)] button
to delete it.
4. Select [Caplio Software] from [Add/Remove Programs] of the
[Control Panel], click the [Add/Remove] button and then install the
software.
5. Turn off your camera and computer.
6. Turn your computer back on and reinstall the software from the CD-
ROM. (At this time, do not connect your camera.)
Next, connect the camera to the computer with the USB cable.
When the computer recognizes the camera, the [New Hardware]
screen launches and your camera is registered by the computer.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Caplio G3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Caplio G3 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Caplio G3

Ricoh Caplio G3 Additional guide - English - 37 pages

Ricoh Caplio G3 User Manual - English - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info