65800
226
Zoom out
Zoom in
Previous page
1/256
Next page
223
11
Appendices
Communication and send setting errors
FTP send setting errors
Wireless LAN related error messages
(Only for Caplio 500SE-W)
Error Message Cause and Action Refer to
CONNECTION ERROR The camera is unable to establish a connection for some
reason. Check the communication settings.
P.194
P.202
SEND METHOD MUST BE
SELECTED
The [Send Method] setting is not selected in the communication
settings. Select [Send via FTP] or [Send via Mail].
P.202
NO SEND TO ADDRESS The [To Address] setting is not selected in the communication
settings. Select the [To Address] setting.
P.202
CANNOT CONNECT TO
ACCESS POINT
The destination access point is off or otherwise not operating.
Check the access point.
-
Incorrect communication settings. Check the send settings. P.202
THE IP ADDRESS IS ALREADY
IN USE
The same IP address as the camera exists in the destination
network. Check the [IP address] in the Detailed Setups
[Networks] tab.
P.196
CONFLICTING LAN SETTING The first destination sent to after turning the camera on and
the setting in the Detailed Settings [Network] tab or [Wireless
LAN] tab is different. To send to a destination different from
the setting in the [Network] or [Wireless LAN] tab, change the
destination in advance and restart the camera.
P.196
P.219
DESTINATION NOT
REGISTERED
The communication list has not been imported by the camera.
Import the communication list into the camera and try again.
P.202
INVALID KEY SIZE. When [Cryptography/Authentication] in [W/LESS LAN] is
changed on the camera, check the network key.
If [Cryptography/Authentication] is set to [WEP/OPEN] or
[WEP/SHARED], enter the [Network Key] as below.
[String]: Five characters or 13 characters
[Hex]: Ten characters or 26 characters
If [Cryptography/Authentication] is set to [AES/WPA-PSK],
[AES/WPA2-PSK], [TKIP/WPA-PSK], or [TKIP/WPA2-
PSK], enter an 8 to 63 character network key.
For details, refer to [Network Key] on P.197
P.197
P.207
Error Message Cause and Action Refer to
NO UPLOAD SERVER NAME
SETTING
[Server Name] for the destination is not set in the Detailed
Setups [FTP Send] tab. Set the [Server Name] setting.
P.198
CANNOT DETECT IP ADDRESS Unable to acquire the IP address of the destination server.
Set the correct [Server Name] setting in the Detailed Setups
[FTP Send] tab.
P.198
NO RESPONSE FROM SERVER The destination server does not respond. Check the
advanced settings on the [FTP Send] tab.
P.198
CANNOT CONNECT TO
SERVER
Unable to connect to the destination server. Check the
advanced settings on the [FTP Send] tab.
P.198
SETTING ERROR EITHER IN
USER NAME OR PASSWORD
Incorrect [User Name] or [Password] setting. Set the correct
[User Name] and [Password] settings in the Detailed Setups
[FTP Send] tab.
P.198
THE FOLDER DOES NOT
EXIST.
The specified inbox folder does not exist on the destination.
Set the correct [Folder Name] setting in the Detailed Setups
[FTP Send] tab.
P.198
CANNOT SEND Unable to send files for some reason. Check the advanced
settings on the [FTP Send] tab.
P.198
SERVER ERROR An error is received from the server after connecting to the
server. Try resending the file.
-
226


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Caplio 500SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Caplio 500SE in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info