62170
168
Zoom out
Zoom in
Previous page
1/192
Next page
166
8
Appendices
The flash does not fire or
the flash cannot charge.
The flash cannot be used in the
following cases:
When white balance bracket is
set
In Multi-shot mode
In Movie Mode
In Scene Modes, the flash is
disabled by default.
To shoot with the flash, change
the settings or mode.
P.39
P.77
P.71
P.89
P.178
The flash is set to flash off. Use the F (Flash) button to
cancel flash off.
P.39
Battery is running low. Charge the rechargeable battery
or use the AC adapter. Replace
the alkaline batteries with new
batteries.
P.24
P.27
P.25
Even though the flash
fired, the picture is dark.
The distance to the subject is
greater than 6.5 meters in
telephoto or greater than 10 meters
in wide-angle.
Get closer to your subject and
shoot.
P.39
The subject is dark. Correct the exposure. (Exposure
compensation also changes the
light intensity of the flash.)
P.84
The image is too bright. The light intensity of the flash is not
appropriate.
Move a little away from the
subject or illuminate the subject
with another light source instead
of using the flash.
P.39
Subject is overexposed. Correct the exposure.
Cancel exposure time.
P.84
P.79
The brightness of the LCD monitor
is not appropriate.
Adjust the brightness of the LCD
monitor.
P.119
The image is too dark. The shot was taken in a dark place
while set to flash off.
Use the F (Flash) button to
cancel flash off.
P.39
The subject is underexposed. Correct the exposure.
Set to long exposure time.
P.84
P.79
The brightness of the LCD monitor
is not appropriate.
Adjust the brightness of the LCD
monitor.
P.119
The image lacks natural
color.
The picture was shot in conditions
that made it difficult for auto white
balance to adjust the white
balance.
Add a white object to the
composition or use a white
balance setting other than auto.
P.85
The date or recording
information does not
appear on the screen.
The screen display function is set
to no display.
Press the DISP. button to change
the display.
P.54
The brightness of the
LCD monitor changes
during AF.
You are using AF in a dark place or
when the auto focus range and
surrounding brightness are
different.
This is normal. -
There is a vertical smear
on the image.
This is a phenomenon that occurs
when a bright subject is shot. It is
called the smear phenomenon.
This is normal. -
Problem Cause Solution Refer to
168


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Caplio 500G Wide at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Caplio 500G Wide in the language / languages: English as an attachment in your email.

The manual is 4,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info