67508
218
Zoom out
Zoom in
Previous page
1/231
Next page
Appendices
218
Symptom Cause Measure Page
Images do not appear
on the LCD Monitor.
The power is not on. Or the LCD Monitor is dark. Turn the power on. Or adjust the brightness of the LCD
Monitor.
P. 16
P.127
The AV cable is connected. Disconnect the AV cable. P.100
The screen display status is in [SYNCHRO-MONITOR
MODE].
Press the DISP button and switch display. P.24
It is set to [Power-Save]. Set [Power-Save] to off. P.123
Although it is set to
Auto Focus, it does
not focus.
The lens or A Window is dirty. Wipe clean with a soft, dry cloth. -
The subject is not in the center of the shooting range. Shoot with Focus Lock. P.38
It is a hard-to-focus subject. Shoot with Focus Lock or Manual Focus. P.38
P. 75
The flash does not
fire. Or the flash can-
not recharge.
The Shooting Mode is set to R (Multi-Shot) or 3
(Movie).
Switch the Shooting Mode to 5 (Still Image). P.51
The flash is set to (Flash Off).
Set to Flash Off with the F button. P.51
The White Balance is set to something other than Auto
mode.
Set the White Balance to Auto mode. P.60
Batteries are running low. If using alkaline batteries, replace with a new set.
If using rechargeable batteries, recharge or use the
AC Adapter.
P. 12
P. 13
P. 14
Even though the flash
fired, the picture is
dark.
The distance to the subject is greater than 3.3 meters
in Telephoto or greater than 5.0 meters in Wide-angle.
Get closer to your subject and shoot. P.51
The image is too
bright.
You are too close to the subject. Set to Flash Off with the F button. P.51
It is over-exposed. Use exposure compensation. Cancel Exposure Time. P.57
P. 82
The brightness of the LCD Monitor is odd. Adjust the brightness of the LCD Monitor. P.127
The image is too dark. The shot was taken in a dark place while set to
(Flash Off).
Release the Flash Off with the F button. P.51
It is under-exposed. Use exposure compensation. Set to Exposure Time. P.57
P. 82
The brightness of the LCD Monitor is odd. Adjust the brightness of the LCD Monitor. P.127
The image lacks nat-
ural color.
The picture was shot in conditions that are hard for
Auto White Balance to adjust to.
Add a white object to the composition. Or use Auto
Balance in a setting other than Flash shooting or Auto
Mode.
P. 60
The date, or recording
information does not
appear.
The screen display function is set to No Display. Press the DISP button and switch display. P.24
The brightness of the
LCD Monitor changes
during AF.
You are using it in a dark place or when Auto Focus
range and surrounding brightness are different.
This is normal. -
There is a vertical
smear on the image.
This is a phenomenon that occurs when a bright sub-
ject is shot. It is called the smear phenomenon.
This is normal. -
218


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Caplio 400G Wide at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Caplio 400G Wide in the language / languages: English as an attachment in your email.

The manual is 10,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Caplio 400G Wide

Ricoh Caplio 400G Wide User Manual - German - 228 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info