460798
47
Zoom out
Zoom in
Previous page
1/56
Next page
The Scanner Function
41
5
When an Error Message Appears on the Client Computer
This section describes possible causes and actions for common error messages
displayed on the client computer when using the TWAIN driver.
Note
If an error message not detailed in this section appears, turn off the machine's
main power switch, wait a few seconds, and then turn it on again. If the mes-
sage reappears after scanning is performed again, make a note of the message
and the error number (if it is listed in the table), and contact your service rep-
resentative. For details about how to turn off the main power switch, see Gen-
eral Settings Guide.
Message Causes and solutions
[Clear Misfeed(s) in ADF.] Remove jammed originals. Check the
originals are suitable for scanning, and if
they are, place them again.
[Insufficient memory. Close all other applications, then re-
start scanning.]
Close all unnecessary applications run-
ning on the client computer.
[Insufficient memory. Reduce the scanning area.] Reset the scan size.
Lower the resolution.
Note
If a misfeed occurs during printing,
scanning cannot be performed. If this
happens, remove any misfed paper,
and then proceed with scanning.
[Scanning has been aborted.] Check the machine's power switch is
turned on.
Check the machine is connected to the
network correctly.
[No original on exposure glass.] Place the original correctly.
See p.29 “Placing Originals”.
[No response from the scanner.] Check the machine is connected to the
network correctly.
The network is busy. Wait for a while,
and then try to reconnect.
[Scanner is in use by other user. Please wait.] The scanner function is being used. Wait
for a while and reconnect.
[Scanner is not available. Check the scanner connection
status.]
Check the machine's power switch is
turned on.
Check the machine is connected to the
network correctly.
Disable any firewalls that are running
on the client computer.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Aficio MP 161 Scannen at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Aficio MP 161 Scannen in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Aficio MP 161 Scannen

Ricoh Aficio MP 161 Scannen User Manual - German - 58 pages

Ricoh Aficio MP 161 Scannen User Manual - Dutch - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info