670028

Ricatech RTT25 Manual

4
Zoom out
Zoom in
Previous page
1/27
Next page
GB-3
OPERATING THE GRAMOPHONE
Before use, please make sure to:
-
Remove the stylus protector.
-
Ensure the tone
arm is free to move from the tone
arm rest. Lock the tone
arm in place again when not
in use.
Listening to records
1. Set the FUNCTION
selector ( 10 ) on the PHONO position and lift the turntable
dust cover
2. Place a record on the turntable, over the central spindle. Place the EP adapter over the
central spindle
when playing 17cm EP records.
3. S
et
the Speed selector (9) to 33, 45 or 78 rpm depending on the record.
4. Lift the tone arm from the tone arm rest by using the Lift lever (7) and slowly move it over the record. The
Turntable platter (1) will start turning.
5. Place the tone arm (5) on the desired position of the record.
6. Gently lower the tone arm onto the record to start playing.
7.
When the record is finished the tone
arm wil
l aut
omatically stop. Lift the
tone
arm from
the record and
put it back on the rest.
8.
To stop manually, lift the tone
arm from the record and return it to the rest.
Note: Do not stop or turn the platter manually.
Moving or jarring the turntable without securing the tone arm clamp could result in damage
to the tone arm.
Replace the protective cap on the stylus when not in use.
-
USING HEADPHONES
WARNING! Risk of hearing impairment
Set the volume on the playback device to low before connecting the headphones
to the
sound source.
Avoid excessive volume, particularly over extended periods or frequent use. Excessive
volume can result in permanent hearing impairment.
PLEASE READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES
1. Avoid extended play at a very high volume as it may impair your hearing.
2. If you experience ringing in your ears, reduce the volume or shut off your unit.
3. Keep the volume at a reasonable
level
even if your headset is an open-air type designed to allow you to
hear outside sounds. Note that excessively high volume may still block outside sounds.
AUTO -STOP SWITCH OPERATION
Certain types of records may have an auto-stop area outside the pre-set limit, so the turntable may stop
before the last track finishes. If this occurs, set the AUTO-STOP switch (11) to the OFF position. This allows
t
he record to play to the end, but please note that it will not stop automatically. You must manually raise the
tone arm and place it back in the rest and then turn the power OFF to stop the turntable from spinning.
LINE
-
OUT CONNECTION
You can connect this unit to an external stereo system or amplifier by connecting the RCA LINE-OUT jacks
(19) to the auxiliary input jacks on your stereo or amplifier with RCA cables (not included).
Note: The unit’s Volume Control (12) will not adjust the volume when line-out jacks are in use.
USING HEADPHONES (NOT INCLUDED)
Plugging your headphones into the Headphone jack (14) will allow you to listen in private.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricatech RTT25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricatech RTT25 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info