611621
5
Zoom out
Zoom in
Previous page
1/31
Next page
3. Press PRESET + / or PRESET – / to allocate a number from 1 to 20 stations.
4. Press PROGRAM /
to confirm, display shows the preset number waveband and the frequency of the preset station.
5. Repeat steps 1-4 to store other stations to listen to a preset station. Press PRESET + /
or PRESET – / once or
more until the desired preset station in displayed.
To listen to a preset station
Press PRESET + /
or PRESET – / once or more until the desired preset station in displayed.
Automatic programming radio stations
Automatic programming will station preset 1, from this preset number upwards, former programmed tuner stations will be erased.
1. Press and hold PROGRAM /
button until Auto appears
- Icon “ memory” will start flashing
- Available stations are programmed
- After all stations are stored, the last preset station will then be played
ANTENNA
Antenna: for FM reception, the unit is provided with a FM WIRE ANTENNA, move the wire until the reception is clear and
with no interferences. For AM reception, the unit is provided with a directional build-in ferrite antenna. Rotate the set to find
the position in which the best reception is obtained. Do not connect the EXTERNAL FM ANTENNA to any outside antenna.
CASSETTE OPERATION
1. Press the FUNCTION / to set the unit to PHONO mode.
2. While in Phono mode, insert a prerecorded tape through the CASSETTE DOOR.
3. Adjust the volume level by turning the VOLUME DOWN/UP KNOB /
.
4. For fast forwarding, press the EJECT/F.F. half way in. Pressing again, will stop the fast forwarding and return the
cassette to the playing mode.
5. To stop and eject the cassette, press the EJECT/F.F. in completely.
6. When one side of the tape finishes playing, the cassette will automatically stop.
Note: 1.Remove the tape from the unit when it is not in use or stopped.
2.Phono function discontact automatically with cassette in use.
USB & SD-CARD OPERATION
USB operation:
1. Press the FUNCTION / to set the unit to USB mode.
2. Plug-in USB mass storage device. READ is displayed as the system scans the contents of USB device.
3. Track no. 1 of root folder (Folder 1) will be playback automatically after finish reading USB device contents.
4. Press FF /
or FB / once or repeatedly until the desired track number appears in display.
5. Press PRESET + /
or PRESET – / to select desired album.
6. Press STOP/BAND /
to stop playback.
SD-Card operation:
1. Press the FUNCTION / to set the unit to CARD mode.
2. Insert SD-Card into the card slot. “READ” is displayed as the system scans the contents of SD card.
7
ENGLISH
FUNCIÓN SLEEP
Puede ajustar el periodo de tiempo antes de que la unidad entre en modo Standby de forma automática.
En el mando, pulse SLEEP /
repetidamente para seleccionar el periodo de tiempo (en minutos):
-En la pantalla aparecerá la secuencia: SLEEP 90, 80, 70, 60, 50, 40, 30, 20, 10
-En la pantalla aparecerá brevemente la opción seleccionada y volverá al estado anterior.
Para desactivar, pulse SLEEP /
de nuevo para volver a “00” o pulse POWER / para que la unidad entre en modo
Standby.
CONTROL DEL VOLUMEN
Pulse VOLUME UP / / VOLUME DOWN / en el mando para ajustar el volumen.
FUNCIÓN MUTE
Puede desconectar de forma temporal el sonido sin tener que apagar la unidad.
1. Pulse MUTE /
en el mando a distancia para desactivar el sonido,
la reproducción continuará sin sonido.
2. Para activar el sonido puede:
- pulsar MUTE /
de nuevo;
- ajustar los controles de volumen;
- cambiar la fuente
EQ
Pulse EQ / en el mando a distancia para seleccionar el modo de EQ que desee.
Hay 5 modos de EQ:
RADIO
Sintonización de AM/FM
1. Pulse FUNCTION / para ajustar la unidad en modo TUNER (radio).
2. Pulse STOP/BAND /
para seleccionar la banda que desee: FM o MW
3. Sintonización automática – Mantenga pulsado FF /
or FB / hasta que la se encuentre una emisora que se
escuche de forma correcta. Si se recibe una emisora en estéreo, aparecerá (ST). Repita el paso 3 si es necesario
hasta que encuentre la emisora que desea,
4. Sintonización manual - Pulse FF /
or FB / brevemente y de forma repetida hasta encontrar una emisora.
Memorización de emisoras de radio
Puede almacenar hasta un total de 40 emisoras de radio (FM y MW) en la memoria, de forma manual o automática.
1. Sintonice la emisora que desee.
2. Pulse PROGRAM /
para activar la memorización, parpadearán el icono "MEMORY” y P01.
54
ESPAÑOL
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricatech RMC250 De Luxe - 6 in 1 turntable at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricatech RMC250 De Luxe - 6 in 1 turntable in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info