645166
4
Zoom out
Zoom in
Previous page
1/41
Next page
CAUTION: Connecting a USB device/SD Card upside down or back to front could damage the audio system or
USB device/SD Card. Before connecting it, double check to make sure the direction of insertion is correct.
USB Operation:
1. Switch the unit ON by turning the power ON-OFF SWITCH/VOLUME CONTROL switch to the ON position
and turn the Sound Volume to mid-range position.
2. Turn the Function Knob on the front to the ―RADIO/SD/USB ON‖ position.
3. Switch the AM-FM-USB/SD Band switch (on the back panel) to select the SD/USB mode.
4. Insert an MP3 USB device or a Flash Drive containing MP3 songs
(size up to 4GB max, not supplied) into the USB Port on the side
panel. Make sure the USB plug is inserted correctly.
Notes:
* To operate the MP3 device, please refer to its manufacturer‘s operating manual.
* If both an SD Card and a USB device are connected, press the USB/SD button on the side panel to switch
to the preferred device to be played.
5 Press the PLAY/PAUSE BUTTON to play the music on the external device.
6 The green ACC LED will flash whilst the music is playing.
7 To pause the music, press the PLAY/PAUSE BUTTON again.
8 In Play Mode, press the SKIP+/ SKIP-BUTTON once or repeatedly until the desired track has been found.
9 To stop playing the music stored on the USB device/Flash Drive, press the PLAY/PAUSE
BUTTON. AT THIS STAGE, DO NOT DISCONNECT THE USB DEVICE/FLASH DRIVE!
10 Before disconnecting the USB device/Flash Drive, switch the main unit off first. Unplug the device from the
USB Socket by pulling it out straight.
WARNING:
1 Do not disconnect the USB/SD device whilst the music is playing, as this may damage the device or the
music files stored on it.
2 To disconnect the USB/SD device safely, turn off the unit first or switch to another Mode.
IMPORTANT NOTES:
a) This product may not be compatible with USB devices with multiple USB identifiers (such as a USB HUB +
USB Flash Drive), it ONLY works when connected directly to a USB Flash Drive or MP3 Player.
b) If there is no MP3 / USB device / Flash Drive / SD card connected or MP3 file detected, the red ERR LED
light will be on.
c) The green ACC LED light will flash during PLAY mode whilst MP3 data is transferring.
d) This unit only plays back MP3 music files, not WMA format music files.
e) If the USB/SD is not functioning, power off the unit to reset.
USB SPECIFICATION
Interface
* USB2.0 Full speed, HOST (a USB HUB is not supported)
Corresponding Flash memory
* USB1.1 Flash memory
* USB2.0 High speed Flash memory
* Minimum memory size: 512MByte
* Maximum memory size: 4GByte (Only FAT16 corresponds)
NOTES:
a) The USB Port does not support connection with a USB Extension Cable.
b) It is not designed to connect to a Computer.
c) It is not guaranteed that all USB memory devices and SD cards will work on this audio
system.
MP3 Decoder
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricatech PR220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricatech PR220 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info