638319
21
Zoom out
Zoom in
Previous page
1/25
Next page
20
This Rainbow appliance has been thoroughly tested and inspected. If a minor issue develops, the following
troubleshooting procedures may help identify and correct the issue. If you are unable to resolve the issue, contact
an Authorized Rainbow Distributor for service. Any service procedure not listed below should be performed by an
Authorized Rainbow Distributor or Service Center.
!
WARNING: Disconnect electrical supply before performing maintenance to the unit. Failure to do so could
result in electrical shock or personal injury.
ISSUE POSSIBLE CAUSE POSSIBLE SOLUTION
The Rainbow motor is not running Rainbow not properly latched to water
basin. Air inlet screen is plugged with
debris.
Ensure side latches of water basin are
locked.
Not  rmly plugged in. Plug unit in  rmly or try another outlet.
Air inlet screen is plugged with debris. Clean o debris thoroughly.
Automatic resetting motor protector
has tripped.
Turn Rainbow o . Leave o for 30
seconds. Turn Rainbow back on.
Defective cord, switch or Rainbow. Contact an Authorized Rainbow
Distributor or Service Center.
Noticeably reduced air ow Rainbow not correctly positioned on
water basin.
Ensure Rainbow is properly seated and
latched onto water basin.
Plugged hose, wand, attachment or
Power Nozzle.
Remove obstruction from clogged area.
HEPA Neutralizer needs servicing or
replacement.
Remove HEPA Neutralizer and clean or
replace.
Rainbow is running on low speed. Turn power switch to high speed.
Separator is clogged or dirty. Remove separator and clean. (See
page 10)
Unit discharges dust Low level of water in basin. Fill water basin to correct level.
Excessively dirty water in basin. Replace with clean water.
Hole in HEPA Neutralizer. Contact an Authorized Rainbow
Distributor or Service Center.
Heavy foaming in water basin Soapy contaminant in water basin. Replace with clean water.
High level of water in basin. Empty water basin and re ll to correct
level.
Unit discharges a musty odor Water basin not cleaned or dumped
after use.
Clean water basin and use Deodorant Air
Freshener while cleaning.
Separator clogged or dirty. Remove separator and clean. (See
page 10)
Damp HEPA Neutralizer. Remove HEPA Neutralizer and clean or
replace.
troubleshooting guide
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rexair Rainbow PowerNozzle e2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rexair Rainbow PowerNozzle e2 in the language / languages: English as an attachment in your email.

The manual is 9,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rexair Rainbow PowerNozzle e2

Rexair Rainbow PowerNozzle e2 User Manual - German - 24 pages

Rexair Rainbow PowerNozzle e2 User Manual - Dutch - 24 pages

Rexair Rainbow PowerNozzle e2 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info