English
9
To use manual tuning
Select the Manual tune option.
The display shows the current station number
and frequency:
Press
< or > to step between the stations
and press
SELECT to select the current
station.
If there is a station corresponding to this
station number and frequency the display will
show the station name, and a tuning meter
showing the signal strength.
To set the dynamic range control
Uno™ includes a dynamic range control that
automatically boosts the volume of quieter
sounds for listening in noisy environments.
Select the
DRC value option.
The display shows the current DRC value and
allows you to adjust it:
The DRC value can be switched between the
following options:
To display the software
version number
Press the MENU button then use the
< and > buttons to scroll across to SW
VERSION
. The software version number
is displayed on the top line of the display.
You should specify this when speaking to
Revo Technical Support.
DRC 0 Dynamic Range Control is
switched off
DRC
1/2 Dynamic Range Control is
set to half normal level.
DRC 1 Dynamic Range Control is
switched on; the default
setting recommended for
noisy environments.
DRC Description