552567
4
Zoom out
Zoom in
Previous page
1/12
Next page
4
Troubleshooting
Service
Steering Trim:
Driving Tips:
Binding Procedure
Driving the Vehicle (continued)
If your Mad Machine
requires repairs or replacement,
DO NOT RETURN TO RETAILER. Contact:
Hobby Services
3002 N. Apollo Drive, Suite 1
Champaign, Il, 61822, U.S.A.
9am-5pm Central Mon.-Fri.
(217) 398-0007
hobbyservices@hobbico.com
revell.com
If the controller sits idle (without input) for 2 minutes, it will go into Power Save Mode. The LED will begin fl ashing slowly. After 9
minutes without input, the controller will shut off.
Run the vehicle on a fl at surface.
Watch the vehicle instead of looking at the controller.
Always release the throttle trigger right away following a crash to prevent damaging the electronics.
The vehicle should be operated in an area that has as much open space as possible with no people or animals nearby.
Do not operate this vehicle on the street.
To bind the controller to the receiver:
1. Hold the right trim button on the controller and turn on the controller. The LED on the controller will blink.
2. Turn on the receiver. The LED on the controller will turn solid.
3. Process is complete.
Problem: The wheels won’t turn.
Solution: Recharge the battery.
Problem: The controller doesn’t function.
Solution: Make sure the batteries are inserted correctly.
Insert new batteries.
Problem: The vehicle loses speed or comes to a stop.
Solution: Recharge the battery.
Problem: Controller LED fl ashing slowly (low voltage).
Solution: Replace the controller batteries.
If the vehicle pulls right (when viewed from
behind), push the left trim button.
If the vehicle pulls left (when viewed from
behind), push the right trim button.
Steering Trim Buttons
REVELL, INC. 1850 HOWARD ST., UNIT A, ELK GROVE VILLAGE, IL 60007 U.S.A.
MADE IN SHANGHAI, CHINA
PLEASE RETAIN PACKAGING FOR FUTURE REFERENCE. CONTENTS AND
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
© 2013 REVELL INC. A SUBSIDIARY OF HOBBICO, INC.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Revell 1-16 Mad Machine Truggy RTR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Revell 1-16 Mad Machine Truggy RTR in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info