793555
24
Zoom out
Zoom in
Previous page
1/32
Next page
6
Handle installation
Install handle to the doorframe of the appliance.
The handle is delivered in a separated package with screws together
inside the carton.
1. Reveal two small holes on the doorframe from inner side by
pulling out a bit the door seal
2. Aim the handle to the holes and insert the screws from
inside and screw them up with screwdriver.
3. Put back door seal to cover the screws.
Reversing the door
Our wine cooler is delivered with the door opening from left to right. To reverse the
opening direction:
Open the door at 135 degrees and keep it steady. (be careful that the door is tall &
heavy)
Unscrew the four screws from the lower hinge [Figure 1].
Pull the door outwards slowly [follow the arrowhead direction in Figure 1] to get off
the lower hinge and continue to pull the door downwards slowly until getting off
from the top right hinge, and unscrew the two screws to take off the lower hinge
plate from the door [Figure 2].
Screw top right hinge off from the cabinet and keep it in the polybag for needs if
you want to change back left opening door in the future.[Figure 3]
Install the top left hinge & the lower hinge to the left side of the cabinet.( is
delivered in a separated polybag inside the packing carton).[Figure 3]
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Respekta WKS171-19 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Respekta WKS171-19 in the language / languages: English, German as an attachment in your email.

The manual is 4.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info