Manual Respekta KS88.4 (page 38 of 42) (English, German)

793544

Zoom out

Zoom in

1/42

EN - 38

• Defrosting occurs automatically in

the refrigerator compartment during

operation. The water is collected by

the evaporation tray and evaporates

automatically.

• The evaporation tray and the water drain

hole should be cleaned periodically with

the defrost drain plug to prevent the

water from collecting at the bottom of the

refrigerator instead of owing out.

• You can also clean the drain hole by

pouring half a glass of water down it.

Freezer defrosting process

• Small amounts of frost will accumulate

inside the freezer, depending on the

length of time the door may be left open

or the amount of moisture introduced.

It is essential to ensure that no frost or

ice is allowed to form in places where

it will a󰀨ect the close tting of the door

seal. This might allow air to penetrate the

cabinet, encouraging continuous running

of the compressor. Thin frost formation

is quite soft and can be removed with a

brush or plastic scraper. Do not use metal

or sharp scrapers, mechanical devices or

other means to accelerate the defrosting

process. Remove all dislodged frost from

the cabinet oor. It is not necessary to

switch o󰀨 the appliance for the removal

of thin frost.

• For the removal of heavy ice deposits,

disconnect the appliance from the

mains supply, empty the contents into

cardboard boxes and wrap in thick

blankets or layers of paper to keep cool.

Defrosting will be most e󰀨ective if carried

out when the freezer is nearly empty

and should be carried out as quickly

as possible to prevent an unnecessary

increase in the temperature of the

contents.

• Do not use metal or sharp scrapers,

mechanical devices or other means to

accelerate the defrosting process. An

increase in temperature of frozen food

during defrosting will shorten the storage

life. Keep contents well wrapped and cool

while defrosting is taking place.

• Dry the inside of the compartment with a

sponge or a clean cloth.

• To accelerate the defrosting process,

place one or more bowls of warm water

in the freezer compartment.

• Examine the contents when replacing

them in the freezer and if some of the

packages have thawed out, they should

be eaten within 24hours, or be cooked

and re-frozen.

• After defrosting is complete, clean the

inside of the appliance with a solution

of warm water and a little bicarbonate

of soda, then dry thoroughly. Wash all

removable parts in the same way and

reassemble. Reconnect the appliance

to the mains supply and leave for 2 to

3 hours on setting number MAX before

introducing the food back into the freezer.

Replacing LED Lighting

To replace any of the LEDs, please contact

the nearest Authorised Service Centre.

Note: The numbers and location of the

LED strips may change according to

the model.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Respekta KS88.4 in the language / languages: English, German as an attachment in your email.

The manual is 2.56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Respekta KS88.4 Manual

Product: