793540
37
Zoom out
Zoom in
Previous page
1/41
Next page
English 26 Installation preparation
Prepare the kitchen furniture before installing the appliance according to the following
specifications:
GKE144
Built-in Refrigerator
GB
If cabin shelves (E) are arranged
above the refrigerator, they must also
be cut out accordingly.
If the refrigerator is placed on a cabinet
shelf (F), this must also be cut out
according.
1. Adequate ventilation must be
ensured for properly function of the
cooling system.
Namely through an air inlet
opening (A) in the base of at least
200 cm2 and an exhaust air
opening (B) of at least 200 cm2,
through which the waste heat
generated by the refrigerator can
escape.
2. Install a grounded wall socket at
a maximum height of 2100
mmoutlet (C)
3. The minimum distance between
the back of the appliance and the
back of the kitchen furniture (D)
mast be
38 mm.
If the mains plug is no longer
accessible after installation of the
device, a disconnection device
must be installed on the installation
side. The disconnecting device is a
switch with a contact opening of at
least 3 mm, including circuit
breakers and fuses as well as
contactors.
F
min. 200 cm2
min. 200 cm2
A= min. 200 cm2
E
F
D
C
min. 50
540
min. 541
min.38
min. 200 cm2
540
A
B
max. 2100
min.
578
min 145
540
144
fi210802
16
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Respekta GKE144 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Respekta GKE144 in the language / languages: English, German as an attachment in your email.

The manual is 1.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info