793449
27
Zoom out
Zoom in
Previous page
1/28
Next page
English
NOTE! Before installing the hood, insert the valve flaps as described below:
Fitting the V-flaps:
If the valve flaps are not fitted at the factor
y
:
First install half part 1 in the nozzle B10
Pins 3 must be top oriented.
Repeat all operations for the assembly of the half part 2
2. Install the expansion pipe onto the cooker hood with a cable tie, see pic 2.
3. Install the outside chimney bracket with 2 pcs ST4*8 scrwes on the outside chimney, make sure
that the inside chimney could be moved inside freely, see pic 3.
17. Installation Instruction
The cooker hood should be placed at a distance of 65 to 75 cm above the cooking surface in
order to achieve the best possible effect (pic 1).
1. Drill 6pcs φ8 mm holes in the wall at a suitable
place to fix inside chimney hood body and safety
screws once the installation height is fixed, and
keep it in line. The installation position of the inside
chimney bracket is the highest position of the
inside chimney, see pic 1.
GB
1
2
3
fi201014at
12
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Respekta CH 77090WA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Respekta CH 77090WA in the language / languages: English, German as an attachment in your email.

The manual is 1.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info