793447
26
Zoom out
Zoom in
Previous page
1/28
Next page
Failure
Solution
Eliminate the blocking or
replace the one-way valve
Replace capacitor
Replace motor
Replace motor
Light damaged
Power cord looses
One way valve and the air
ventilation entrance are not
tightly sealed
Leakage from the connection
of U-shaped section and
cover
The leaf damaged and
causes shakin
g
The motor is not tightly
hanged
The body is not tightly hanged
The distance between the
hood body and the hob too
big
Too much ventilation from
open doors or windows
Mounting bracket not firmly
fixed
Hood fastening screws not
firmly tightened
16. Problem shooting Cooker hoods
The internal with of motor off or a bad smell
from the motor
Beside the above mentioned, check the following:
Replace lights
Connect the wires as per the electric
diagram
Cause
One flapp of the one-way valve is blocked.
One-way valve not installed correctly
The capacitor damaged
The motor jammed bearing damaged
Light does not
work, motor does
not work
Tighten the screws on the mounting
bracket securely
Tighten the fastening screws firmly
English
Installation- and Operating Instruction Cooker Hoods
Light on, but
motor does not
work
Oil leakage
The hood is instable
Insufficient
suction
Lower the position of the hood
Choose a new place and resemble the
machine
Take down the one way valve and seal
with glue
Take U-shaped section down and seal
with soap or paint
Shake of the
body
Replace the leaf
Lock the motor tightly
Fixed the body tightly
GB
fi200813
11
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Respekta CH 77060WA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Respekta CH 77060WA in the language / languages: English, German as an attachment in your email.

The manual is 1.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info