793464

Respekta CH 69090 SA Manual

8
Zoom out
Zoom in
Previous page
1/9
Next page
14. Pull the inner chimney shaft straight up to the ceiling and place one marking line
on the sides of the shaft. (Fig. e)
15. Remove the chimneys from the hood.
16. Hold the upper (inner) chimney mounting bracket (Fig. f) at the top center of the
ceiling between the drawn marks (Fig. e) and mark the drilled holes with the two
holes (Fig. f) in the mounting bracket a pencil.
17. Using an 8mm masonry drill, drill two 40mm deep holes at the pencil markers and
place two plugs.
20. Slide the inner chimney shaft all the way down.
19. Place the two nested chimneys on the hood.
22. Fix the lower chimney shaft with two ST4 * 8mm screws on the sides of the hood
(Fig. g).
23. Pull the upper (inner) chimney shaft all the way up and secure it to the mounting
bracket with two ST4 * 8mm screws. (Fig. h)
25. Mount the carbon filters on the sides of the motor. (See user's manual chapter
"Using the carbon filters").
24. Lift the hoods on the front, remove the grease filter and secure the hood from the
inside with two ST4 × 30mm screws through the 2 holes in the hood back panel to
secure the hood. (Fig. i)
21. Attach the lower chimney stabilize- and mounting plate (Fig.d) to the wall with two
ST4 x 40mm screws.
18. Fix the inner chimney mounting bracket (Fig. f) to the wall with two ST4 × 40mm
screws at the top of the ceiling.
Fig. f)
Fig. g )
Fig. e)
Fig. h)
Fig. i)
fi200728ATL 3/4
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Respekta CH 69090 SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Respekta CH 69090 SA in the language / languages: English, German as an attachment in your email.

The manual is 0.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info