793444
25
Zoom out
Zoom in
Previous page
1/26
Next page
Failure Cause
One flapp of the one-way valve is
blocked. One-way valve not installed
correctly
The capacitor is damaged
Motor bracket defective / jams
Suspicious smell from the motor
Light damaged
No power, device cable not properly
connected
One-way valve leaking
Leakage from the junction of the
chimney with the hood body
A flap of the on-wey valve is
damaged and causing vibrations
The motor is not tightly mounted
The hood is not tightly fixed
The distance between the hood and
the hob is too big
Too much air flow from open doors
or windows
Mounting bracket not firmly fixed
Hood fastening screws not firmly
tightened
Solution
Eliminate the blocking
or replace the one-way
valve
Replace capacitor
Replace motor
Replace motor
Replace the complete
one-way valve
Fix the hood tightly
Seal the junction with
suitable means
Fix the hood tightly
Beside the above mentioned actions, check the following:
English 16. Cooker Hood Trouble shooting
Light on, but motor
does not work
Oil leakage
Replace lights
Check fuse, connect
cable correctly (electric
diagram)
Seal the junction with
suitable means
Light does not work,
motor does not run
Vibration of the hood
Tighten
the
screws
on
the mounting bracket
securely
Tighten the fastening
screws firmly
The hood is instable
Insufficient suction
Lower the position of
the hood
Close windows and
doors
GB
fi200817 11
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Respekta CH 66038-90SAM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Respekta CH 66038-90SAM in the language / languages: English, German as an attachment in your email.

The manual is 1.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info