Manual Respekta CH 22010-90 WB Svea (page 17 of 24) (English, German)

793401

Zoom out

Zoom in

1/24

English Operating instructions / users manual Cooker Hoods

fi191007atNEG

2. Intended use

The appliance is intended for domestic use.

The manufacturer is not responsible for damage

resulting from improper use or maloperation.

Extractor hoods remove unpleasant odours and

vapours and create a pleasant room atmosphere.

Particles of grease, steam and also moisture are

absorbed by the grease filter.

A correctly dimensioned extractor hood creates a

pleasant room climate without producing draughts

and ensures a bearable air humidity of 40-60%.

Make sure no open fire is burning in the

fireplace before you switch on the appliance or there

may be a heavy smoke formation in your home.

Toxic combustion gases can also be drawn from the

chimney or flue, into living rooms. This can be lethally

dangerous!

3. Protection of the environment

3.1 Packing

The packing materials are 100% recyclable. Comply

with local regulations for their disposal.

The packing materials (plastic bags,

polystyrene moulded parts etc) are dangerous for

children. So keep packing material out of the reach

of children.

3.2 Disposal

If this appliance is a replacement for an old

appliance, please dispose of your old appliance

according to the statutory regulations. Prior to

disposal the appliance must be rendered

unserviceable by cutting off the power supply cable.

The appliance is to be sent for disposal to the

responsible collection authorities.

4. Tips and general advice

a) Prior to carrying out cleaning or maintenance work

the power supply to the extractor hood is to be cut

off by removing the supply plug.

b) The air extracted from the hood is not to be routed

over the exhaust air pipeline of the heater or other

non-electric operated appliances.

c) No flambé dishes are to be prepared under the

extractor hood. The open flames could destroy the

hood or even cause a kitchen fire.

d) Never leave pans unwatched when frying because

fat can easily catch fire.

e) Constant maintenance Guarantys problem-free

operation and optimal hood performance.

f) If the hood is used together with other non-

electrically operated appliances, the room partial

vacuum must not exceed 4 Pa (4 x 10-5 bar).

g) Make sure that the room is adequately ventilated.

h) Regularly clean encrusted food from appliance

surfaces.

i) Regularly clean or replace the filter.

The exhaust air hose must not be made from or

contain flammable materials.

5. Before using the hood



Ensure that the hood has not suffered damage

during transport.

Installation and connection of the electrical

supply and the exhaust air must be carried out by

experienced tradesmen according to the

manufacturer’s instructions and in compliance with

the local requirements.

6. Using the hood

6.1 Operating safety information

The grease filter must always be in place

when operating the hood, otherwise grease vapour

can become deposited in the hood and the exhaust

air system.



With gas hobs, take care that hobs are not

operated without cooking utensils.

Parts of the hood can be damaged by the rising

heat from open gas flames.



Flame cooking under the hood is not permitted

due to the fire risk. The rising flame can set fire

to grease deposited in the filter.



Due to the fire risk, frying or cooking with oils and

fats under the hood is only to take place under

constant surveillance.

Attention! The risk of self-ignition increases

with oils which have been used repeatedly used.



Other activities with an open flame are not

permitted. These could damage the filter or other

parts of the appliance or even start a fire.

6.2 In exhaust air mode:

The extracted air is emitted outdoors via the exhaust

hose.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Respekta CH 22010-90 WB Svea in the language / languages: English, German as an attachment in your email.

The manual is 2.13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Respekta CH 22010-90 WB Svea Manual

Product: