Manual Respekta CH 11050 ISB (page 11 of 13) (English, German)

793454

Zoom out

Zoom in

1/13

6. Guide the 4 wire cables throu

h the holes 1 in the

suspension plate cover, the device cable through hole 2 and

mount the supplied connector on the device cable. Then run

the device cable through the recess 3 in the mounting plate.

(Fig .B4)

From now on, the presence of 2-3 people

is required. One or two of them for lifting

and holding the hood body and one for the

final assembly of the cooker hood.

7. Have one or two helpers to bring the hood body up to a

appropriate height, so that the following assembly steps can

be carried out.

8. Insert the device plu

into the socket

9. Mount the mounting plate on the ceiling with 4 ST6 x 40

mm screws (Fig. B)

10. Attach the 4 adjustable screws to the suspension plate, turn them to the correct length and not

too tight. Pass the 4 wire ropes through the 4 adjustable screws, determine the length of the wire

ropes and mark them. Use 4 wire locking screws + nuts to secure them to the 4 wire ropes at the

marked locations. Make sure here that the 4 wire ropes are the same length. (Fig. B5)

Fig. B5 Locking

screw nut

Lockig

screw

Adjustable

screw

Wire rop

fi200604atl 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Respekta CH 11050 ISB in the language / languages: English, German as an attachment in your email.

The manual is 2.05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Respekta CH 11050 ISB Manual

Product: