692203
14
Zoom out
Zoom in
Previous page
1/64
Next page
14
10. Before installation
Carefully remove all parts from the packaging.
Remove the protective lm from the colour touch display.
Cut the cable ties on both sides using a wire cutter.
Ensure that no parts are missing or damaged. Do not use the printer if parts are missing or damaged.
11. Assembly
a) Setting up the 3D printer
When choosing a location for the 3D printer, ensure that the power switch is easily accessible so that you
can switch it off quickly in the event of a fault.
Ensure that there is sufcient ventilation around the printer. Do not place the printer on soft surfaces (e.g.
rug or bed). The air must be able to circulate freely and must not be obstructed by other objects. This would
prevent heat from dissipating from the printer and lead to overheating (re hazard).
Place the printer on a stable surface and ensure that it is securely in place. It may cause an injury if it falls
off the surface.
Ensure that the USB and mains cable are not pinched or damaged by sharp edges.
Lay the cables in a place where people will not trip over them or become entangled. This may cause an
injury.
Place the 3D printer on a dry, level surface that is not sensitive to vibrations.
Anti-slip feet are attached to the bottom of the printer. If necessary, place a protective cover underneath the printer
to prevent the surface from getting scratched.
b) Installation and connection
The mains socket must be close to the printer and easily accessible so that you can quickly
disconnect the printer from the mains in the event of a fault.
Exercise caution when handling the mains cable and connecting it to the mains. Mains voltages
can cause fatal electric shocks.
Before connecting the printer to the mains, check that the voltage stated on the printer matches
the voltage of the mains socket. If not, do not connect the printer to the mains. An incorrect mains
voltage can cause irreparable damage to the printer and endanger the user.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce RF100 XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce RF100 XL in the language / languages: English as an attachment in your email.

The manual is 7,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Renkforce RF100 XL

Renkforce RF100 XL User Manual - German - 62 pages

Renkforce RF100 XL User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info