692203
58
Zoom out
Zoom in
Previous page
1/64
Next page
58
19. Verhelpen van storingen
Probleem Mogelijke oplossing
Na het inschakelen werkt de 3D-printer
niet. Het touchscreen en de printruimte-
verlichting gaan niet aan.
Controleer de aansluiting van de stroomkabel.
Controleer het stopcontact. Wordt deze correct van stroom voorzien?
Er is geen USB-verbinding met de
3D-printer mogelijk.
Controleer de aansluiting van de USB-kabel.
Is bij de software de juiste USB-poort geselecteerd?
Zijn de benodigde drivers geïnstalleerd?
Verbreek de USB-verbinding en verbind deze daarna weer.
Schakel de 3D-printer uit en daarna weer aan.
Herstart de computer.
Gebruik een andere USB-poort op uw computer.
Sluit de 3D-printer rechtstreeks aan op een USB-poort van uw
computer. Gebruik geen USB-hub.
Het printobject is defect.
Controleer de temperatuurinstellingen van het mondstuk. Deze
moet passen bij het lamentmateriaal en het printobject. Probeer
verschillende temperatuurinstellingen uit.
Start het printproces pas aös het mondstuk de benodigde temperatuur
heeft bereikt.
Verklein de afstand tussen het printbed en het mondstuk (zie
hoofdstuk “a) Printbed kalibreren” op pagina 29).
Als u via de computer print, dient u andere programma’s te sluiten, die
veel rekenvermogen verbruiken. Virusscanners en downloads kunnen
de signaaloverdracht naar de 3D-printer eveneens belemmeren.
Probeer dezelfde print via de SD-kaart te starten om ervoor te zorgen
dat niet misschien de USB-verbinding de oorzaak van het probleem is.
Verwijdervoorelkeprinthetovertolligelamentuithetmondstuk.
Delamenttoevoerbreektafofer
wordtnietvoldoendelamentmateriaal
aangevoerd.
Controleerdelamentspoel.Dezemoetgemakkelijkkunnendraaien.
Controleerofhetlamentmateriaalzichomdespoelofspoelhouder
gewikkeld heeft of is vastgeklemd.
Stelvastofhetlamentviadelamentslangcorrectwerdgeplaatst.
Controleer of de mondstuktemperatuur te laag is voor het gebruikte
lamentmateriaal.
Controleer of het mondstuk geblokkeerd is. Reinig het mondstuk (zie
voor details hoofdstuk “b) Mondstuk reinigen” op pagina 56).
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce RF100 XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce RF100 XL in the language / languages: Dutch as an attachment in your email.

The manual is 8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Renkforce RF100 XL

Renkforce RF100 XL User Manual - English - 64 pages

Renkforce RF100 XL User Manual - German - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info