692210
27
Zoom out
Zoom in
Previous page
1/64
Next page
27
13. Tips for 3D printing
Never disconnect the power supply, USB cable or SD card during the printing process.
The print quality depends on numerous factors. These include:
- Print speed
- Layer thickness
- Printer bed calibration
- Nozzle temperature
- Hot plate temperature (for item. 1592461)
- Filament loading speed
- 3D model structure
These factors mean that it is not always possible to achieve a satisfactory result after the rst print attempt. Fine-
tune the parameters to improve the print quality.
Each material requires different print settings.
Avoid an overhang of more than 45°. If necessary, use the structural platform option in "Cura" and remove the
platform after printing.
a) Nozzle temperature
The optimum nozzle temperature depends on the lament material and the layer thickness. The printing temperature
for the lament varies depending on the material and manufacturer. Always check the specications of the lament
before printing. For best results, use Renkforce Original laments.
Use the standard temperature for the rst test print.
To optimize the print quality, print the same object with the same layer thickness and a different nozzle temperature.
Adjust the temperature in 5 °C increments, and then compare the test prints.
This enables you to determine the optimal nozzle temperature for different laments and layer thicknesses.
If the nozzle temperature is too high, the material may fail to cool down quickly, causing it to melt into the layer
underneath.
If the nozzle temperature is too low, the lament will be too thick and it will not ow evenly. In addition, the lament
layers may not adhere properly.
b) Preventing nozzle blockages
Do not leave the nozzle at a high temperature for an extended period without printing.
When loading the lament, hold the nozzle at a distance of least 20 mm from the print bed.
Remove the lament after use.
Ensure that there is sufcient ventilation. Do not cover the ventilation slots on the extruder.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce RF100 XL plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce RF100 XL plus in the language / languages: English as an attachment in your email.

The manual is 7,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Renkforce RF100 XL plus

Renkforce RF100 XL plus User Manual - German - 62 pages

Renkforce RF100 XL plus User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info